To get the latest community f/w you need to go into
LMS>Settings>Advanced>Community Firmware and check the box. It can take
up to 24 hours for the f/w to appear and you will need to reboot the
Touch when it will offer to install the latest. Latest f/w is
8.0.1-r16835 which you can check from within LMS>Players. Follow these
instructions carefully if you are going to upgrade:

-To simplify installation of the new firmware, Michael has created a
plugin for LMS which redirects the firmware update check and download to
my alternate site.

It's available in the 3rd Party Plugin section of the LMS
Settings->Plugins tab. After installaton and an LMS restart, navigate to
Settings->Advanced->Community Firmware for Touch/Radio/Controller and
click the checkbox to enable the redirection. You MUST be running LMS
8.0.1 or newer to install the plugin. piCorePlayer requires LMS
8.0.1-1608617100 from December 22, 2020 or newer.

Once enabled, it can take up to the duration set in the LMS Software
Updates setting, which by default is 24 hours, before the firmware is
downloaded and your device prompts with the option to install the
update.
You can also navigate to Settings->Advanced->Software Update to check if
v8.0.1rxxxxx is available on the device. You also have to have enabled
the check for software updates for LMS to even look for new firmware.

I STRONGLY suggest that you perform a Factory Reset of your devices
before installing the new v8.0.1 firmware for the first time. Many of
the patches available for the original firmware are built-in now and may
cause squeezeplay to fail to start at boot. The Enhanced Digital Output
(EDO) applet for the Touch works with the new firmware. However,
_make_sure_you_factory_reset_before_upgrading_if_EDO_is_already_runing_on_your_Touch_.
Also, make sure you connect your device back to the local LMS server and
not mysqueezebox.com after the factory reset to be able to install the
community firmware.-



Lounge: Transporter>Audio Synthesis DAX Decade>Audio Research LS22>Krell
FPB300>Wilson Benesch Act 1's + 2 x Velodyne SPL1000 sub's
Kitchen: SB3>Topping DAC>Arcam Solo>Anthony Gallo Micro's+Sub, Joggler
controller
Office: SB3>Acoustic Energy AE1 Active's, Joggler controller
Garage: Boom>QAcoustics 7000s subwoofer
Bedroom: Radio
Shed: Radio
Workshop: Boom
Garden 1: SB3>JVC amp>Rock outdoor speakers
Garden 2: SB3>JVC amp>Rock outdoor speakers
------------------------------------------------------------------------
Heuer's Profile: http://forums.slimdevices.com/member.php?userid=2543
View this thread: http://forums.slimdevices.com/showthread.php?t=113913

_______________________________________________
Touch mailing list
Touch@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/touch

Reply via email to