On Tue, Dec 1, 2009 at 12:27 PM, donmor46 <[email protected]> wrote:
> Anyone had any experience with the tracker 2 and a Motorola M120. > My radio stays on transmit and goes off when turning a corner. Exact opposite > of what it should do. > Hooked up on the bench, it is on tx and pulses to off as it samples. > Jumper is in HI position. (All jumpers set as when purchased) > Tried two different radio's. > OT1 when hooked up appears to work ok with same radio, cable etc. > > Thanks for any help. Did you look at the Wiki? The cable I use is posted on there... nothing special, usual output configuration. Just be prepared for about 2.5 KHz deviation at full bore. The Motorolas need higher drive than you can get out of the OT2 stock. James VE6SRV
