I missed the start of this. Is it a handheld or a mobile? For a
mobile, I'd start by disconnecting pin 3 (PTT) and testing that it works
when you trigger it manually.
Scott
donmor46 wrote:
>
>
>
>
> The OT2m still stays locked on transmit.
>
> Hooked up my Icom HT and changed the jumper to HT from HI and it also
> remains keyed up. My OT1 works with the same setup.
>
> Is it time to send it back?
>
> Don
>
> >
> > Did you look at the Wiki? The cable I use is posted on there...
> > nothing special, usual output configuration. Just be prepared for
> > about 2.5 KHz deviation at full bore. The Motorolas need higher drive
> > than you can get out of the OT2 stock.
> >
> > James
> > VE6SRV
> >
>
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/tracker2/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/tracker2/join
(Yahoo! ID required)
<*> To change settings via email:
[email protected]
[email protected]
<*> To unsubscribe from this group, send an email to:
[email protected]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
