Tom (callsign?) wrote... > FT-1500->Tracker2<-Garmin Nuvi 350 I think we need: > Garmin 010-10813-00 Mini-B Data Cable w/9 pin female connector > www.argentdata.com/catalog/product_info.php?cPath=28&products_id=90
Unless you are making your own cable, that's the right one to put the Nuvi in FMI mode. > Then (and here's where I'm not sure) from FT-1500->T2, something from > either the 6-Pin Mini DIN Data Jack or 6-pin RJ-11 Modular Mic Jack on > the Yaesu to male 9-pin into the T2. Definitely go with the 6-pin mini DIN cable. That way you can leave the mic connected making it easy to change over to voice. Also, you won't have to worry about setting the volume at the correct level each time you use it. A couple of choices would be to get one from RPC Electronics www.rpc-electronics.com/trackercables.php, or get a Mini-Din Patch Cable from Scott. You would just have to chop the connector off one end and solder a DE-9 on the end to go to the T2. If you got a Y cable as well, you could bring out both serial ports on the T2 if needed. www.argentdata.com/catalog/product_info.php?cPath=21&products_id=38 www.argentdata.com/catalog/product_info.php?cPath=21&products_id=93 73 es cul - Keith VE7GDH -- "I may be lost, but I know exactly where I am!"
