The T2 is tested with the DS18S20. I think the DS18B20 has a slightly different interface, can't remember if I ever added that. It'll connect to the 1WIRE pin on the rear connector for the 135.
Scott Ron K7CDL wrote: > > > i plan on using one of these > http://www.embeddeddatasystems.com/OW-TEMP-xW-12x--Wall-Mount-Temperature-Sensor_p_96.html > > <http://www.embeddeddatasystems.com/OW-TEMP-xW-12x--Wall-Mount-Temperature-Sensor_p_96.html> > > on the T2-135 > > my question is what port do i need to why it for on the alinco, the back > port of frount port? also what senor should i order,the DS18B20 or the > DS18S20, the DS18B20 needs power but the DS18S20 doesnt need power? > thanks for any help. > > K7CDL > Ron > > ------------------------------------ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/tracker2/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/tracker2/join (Yahoo! ID required) <*> To change settings via email: [email protected] [email protected] <*> To unsubscribe from this group, send an email to: [email protected] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
