thanks Ron -------------------------------------------------- From: "Scott Miller" <[email protected]> Sent: Tuesday, February 02, 2010 10:06 AM To: <[email protected]> Subject: Re: [tracker2] Wall Mount Temperature Sensor on a T2-135
> The T2 is tested with the DS18S20. I think the DS18B20 has a slightly > different interface, can't remember if I ever added that. It'll connect > to the 1WIRE pin on the rear connector for the 135. > > Scott > > Ron K7CDL wrote: >> >> >> i plan on using one of these >> http://www.embeddeddatasystems.com/OW-TEMP-xW-12x--Wall-Mount-Temperature-Sensor_p_96.html >> <http://www.embeddeddatasystems.com/OW-TEMP-xW-12x--Wall-Mount-Temperature-Sensor_p_96.html> >> on the T2-135 >> >> my question is what port do i need to why it for on the alinco, the back >> port of frount port? also what senor should i order,the DS18B20 or the >> DS18S20, the DS18B20 needs power but the DS18S20 doesnt need power? >> thanks for any help. >> >> K7CDL >> Ron >> >> > > > > ------------------------------------ > > Yahoo! Groups Links > > > > ------------------------------------ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/tracker2/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/tracker2/join (Yahoo! ID required) <*> To change settings via email: [email protected] [email protected] <*> To unsubscribe from this group, send an email to: [email protected] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
