Hi all Yes it is set in COMPLETE MODE but still only Tx when it wishes to. Not often. Cant work out whats not going on. For a simple plug & play it is NOT.
Dose the T2-301 have to have special firmware? (I think not) Has anyone got a T2-301 with a Peet Bros Wx staion working the way it should be??? I'd be glad to see your settings. I know this is a simple thing stopping me from doing this but cant see it. Cris VK2BOZ --- In [email protected], Scott Miller <sc...@...> wrote: > > Is the unit set to APRS mode, maybe? It should be in COMPLETE mode. > > Scott > > vk2boz wrote: > > > > > > > > Hi Scott > > Yeh i know was just, well i dont know. I have got it to work but it only > > TX weather data when it wants to. WHY would this be? I thought it would > > TX Wx data at the same time the T2-301 Txed (ie 5min intervals). > > > > When i got the Wx station hooked up to the computer running the Wx > > software at the same time i can see when the Wx data is being sent to > > the software. Now steady stream of data shouldnt stop but it does. Could > > this be why its not Txing data every 5 mins? > > > > Happy Easter to all > > Cris VK2BOZ > > > > --- In [email protected] <mailto:tracker2%40yahoogroups.com>, > > Scott Miller <scott@> wrote: > > > > > > 1WIREWX should be OFF. > > > > > > vk2boz wrote: > > > > > > > > > > > > > > > > Thanks Scott > > > > > > > > The baud rate is 19200 not 2400 & 1wirewx is now ON > > > > > > > > Thaks again > > > > Cris VK2BOZ > > > > > > > > --- In [email protected] <mailto:tracker2%40yahoogroups.com> > > <mailto:tracker2%40yahoogroups.com>, > > > > Scott Miller <scott@> wrote: > > > > > > > > > > You should have the Ultimeter in 'complete' mode, the T2 in > > 'auto' mode, > > > > > and the baud rates must match. > > > > > > > > > > The SETFREQ read-back is a known bug, and it'll be fixed eventually. > > > > > > > > > > Scott > > > > > > > > > > vk2boz wrote: > > > > > > > > > > > > > > > > > > Hi guys > > > > > > I have the T2-301 and a peet bros 100 Ultimeter WX staion and > > would > > > > like > > > > > > to know has anyone here got the same setup. I can't get the WX > > info to > > > > > > the T2-301. What am i missing. I've tried all the output modes and > > > > still > > > > > > cant get it to work. > > > > > > > > > > > > BTW. SETPOWER & SETFREQ dont show in the help file but they are > > there. > > > > > > SETFREQ returns a differant RX freq but it still works as to > > the freq > > > > > > that you enter. maybe they will fix it in an update. > > > > > > > > > > > > Cheers > > > > > > Cris VK2BOZ > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >
