Thank you both Luis and Lee for your answers. I have just checked and looks like Fedora mounts from the graphical interface, but does read only, so the problem has to be with my Windows. Anyway, I should have checked that before, because it doesn't look like a problem that Trisquel should/could address.
Regards, Pablo. On dom, 2018-01-14 at 10:02 +0000, Lee Strobel wrote: > Hi Pablo, > > Regarding that issue that you mention: > > I have been dual-booting Windows and GNU/Linux for several years and > I > have always had that same problem, that it is not possible to mount > an > ntfs Windows system partition r/w, even if Windows was fully shut > down > (not hibernated). > > However, I had that problem back when I used Ubuntu, before I > switched > to Trisquel. So, I am fairly sure it is an issue between Windows and > GNU/Linux in general, and not an issue just for Trisquel. > > You should be able to mount the partition for read-only though. > > Regards, > > Lee > > > > On Fri, 2018-01-12 at 15:03 +0000, Pablo Correa Gómez wrote: > > > > I have continued with further testing on devices and I just found > > one > > error while CD/DVD read, external ntfs HDD and Arduino and AVR > > programming over USB worked fine. > > > > The error I found is that Trisquel is not able to mount rw > > the > > Windows ntfs partition that I have in my hard drive: > > > > # sudo mount -v -t "ntfs" -o > > "uhelper=udisks2,nodev,nosuid,uid=999,gid=999" "/dev/sda4" > > "/media/trisquel/TI31299800B" > > > > Windows is hibernated, refused to mount. > > Failed to mount '/dev/sda4': Operation not permitted > > The NTFS partition is in an unsafe state. Please resume and > > shutdown > > Windows fully (no hibernation or fast restarting), or mount the > > volume > > read-only with the 'ro' mount option. > > > > However, I know that Windows is fully shutdown, as I am > > able > > to > > successfully execute that same command from Fedora. In Trisquel > > mounting the device ro works fine. > > > > Cheers, > > Pablo. > > > > ________________________________________ > > De: [email protected] [trisquel-devel- > > bounc > > [email protected]] en nombre de Rubén Rodríguez [ruben@trisqu > > el > > .info] > > Enviado: domingo, 24 de diciembre de 2017 6:26 > > Para: [email protected] > > Asunto: [Trisquel-devel] New Trisquel 8 development images > > > > The new images are available in the usual place: > > http://jenkins.trisquel.info/makeiso/iso/ > > > > Following up discussion on the previous "Freedom Friday" meetings, > > I've > > wrapped up the needed updates to the trisquel-meta package: > > https://devel.trisquel.info/trisquel/trisquel-packages/commit/766ea > > f2 > > 420175fa08cd8151ae2eb8c6e3d9b5757 > > https://devel.trisquel.info/trisquel/trisquel-packages/commit/fa125 > > 28 > > 5f2e04a3d4440527ddb14b88ce08546a1 > > > > As a result the iso build script now uses metapackages to do > > package > > selection, instead of a hardcoded package list. This was a long > > back-and-forth process to move all features from the GNOME-fallback > > desktop packages to the Mate ones. A lot of cleaning is still > > needed > > for > > the LXDE, Sugar, GNOME and KDE metapackages. > > > > Other tasks included updates to the trisquel-desktop-common-data > > package, screensaver, boot splash, free-firmware, and gnome-app- > > install, > > along with the makeiso script itself. > > > > ## Testing > > > > Please test as many features in the images as possible, and report > > all > > outstanding bugs as replies in this thread. Given the amount of > > changes > > done, pay special attention to: > > > > * Internationalization: try different languages if you know them > > enough, look for untranslated applications. If you can, check that > > fonts > > for non-latin scripts work correctly. Test the international > > keyboard > > input system. > > * Accessibility: test that the screen reader and other > > accessibility > > features work as expected. > > * Devices: try printers, cd read/write, bluetooth, cameras, and > > any > > other common devices you may have around. > > > > Note that as discussed in development meetings, the intention is to > > release Trisquel 8 soon as possible and move the development effort > > to 9 > > (to be based on Ubuntu 18.04), so small annoyances will not be > > considered blockers (but all the described systems need to be > > usable). > > > > ## Pending work > > > > The main items still needing work in order to finish the release > > are: > > > > * Testing/QA > > * FSDG issues listed in merge requests, and other MR > > review/approval > > * Deployment and testing of the upgrade system, for Trisquel 7 > > users > > * Artwork > > > > My next focus will be to clear up the merge request queue. > > > > I'll be taking a 3 week break starting this weekend, so I'll not be > > available for the Freedom Friday meetings. It should be a good time > > for > > a final round of testing. > > > > Happy testing and holidays! > > > > Ruben > > _______________________________________________ > > Trisquel-devel mailing list > > [email protected] > > https://listas.trisquel.info/mailman/listinfo/trisquel-devel > > _______________________________________________ > > Trisquel-devel mailing list > > [email protected] > > https://listas.trisquel.info/mailman/listinfo/trisquel-devel > _______________________________________________ > Trisquel-devel mailing list > [email protected] > https://listas.trisquel.info/mailman/listinfo/trisquel-devel _______________________________________________ Trisquel-devel mailing list [email protected] https://listas.trisquel.info/mailman/listinfo/trisquel-devel
