Hi Francois, Using your directions I succeeded to query and change the SO_SNDBUF. I chose the TCustomWinSocket.Dup procedure to do the following: 1. Query the SO_SNDBUF (result was 8192) 2. Set the SO_SNDBUF to 16384 3. Query once again (and yes, the result was now 16384 :))
Two questions remain: 1. Is there any difference if I do these changes in TCustomWinSocket.Connect or in TCustomWinSocket.Dup? 2. When I set the new SO_SNDBUF value before an upload to 16384, after finishing this upload, and beginning a new one, the value was once again 8192. Is it a normal behaviour that I have to set the send buffer size explicitly before every upload? Thanks for your help: Andras Udvari -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Francois PIETTE Sent: Wednesday, December 07, 2005 8:16 PM To: ICS support mailing Subject: Re: [twsocket] FTPCLI - how to query/change FTP send buffer size? >> Not easy. You must change the component and call WSocket_setsockopt >> with the correct parameters at the right place ! The right place is in >> TCustomWSocket.Connect and TCustomWSocket.Dup > Thanks for your reply. And how can I query the current settings? > At the first stage our test I need only the current value. Just have a look at the source code where I told you to insert code and you'll quickly understand. -- Contribute to the SSL Effort. Visit http://www.overbyte.be/eng/ssl.html -- [EMAIL PROTECTED] http://www.overbyte.be -- To unsubscribe or change your settings for TWSocket mailing list please goto http://www.elists.org/mailman/listinfo/twsocket Visit our website at http://www.overbyte.be -- To unsubscribe or change your settings for TWSocket mailing list please goto http://www.elists.org/mailman/listinfo/twsocket Visit our website at http://www.overbyte.be
