Hi Wolfgang, On Thursday 20 March 2008, Wolfgang Denk wrote: > > This patch adds this workaround for the following 440EPx boards: > > sequoia, lwmon5. Others should probably follow this example. > > OK, the default configs for Sequoia doesn't use shared log buffer, and > the lwmon5 uses CONFIG_ALT_LB_ADDR (i. e. it puts the log buffer in > OCM), so these boards will work. > > But any changes to the configuration may easily break this again.
Understood. > I don't like the idea that each affected board has to fix this > (probably differently) in it's board config file. I would prefer a > fix (common to all affected boards) in one central location. I don't like this either. But I have not come up with a "generic" solution till now. It's not so easy since the 440EPx SDRAM setup code is sometimes common (cpu/ppc4xx/denali_spd_ddr2.c) and sometimes board specific. And it gets even more complicated when ECC initialization is needed too. So currently I have no "better" solution as to do it in a board specific way. As always, patches implementing a "better" more generic solution are welcome. Thanks. Best regards, Stefan ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: [EMAIL PROTECTED] ===================================================================== ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users
