In message <[EMAIL PROTECTED]> you wrote: > > The BDI config file for the Yosemite board on the U-Boot manual doesn't wor > k (I can't erase the full range of flash between 0xFC000000 to 0xFFFFFFFF), > so I've been using the one provided by AMCC.
I doubt that. The examples in the manual are generated automatically (by running DUTS); it seems to have worked by then. BTW: Please rstrict your line length to some 70 characters or so. > When I do a reset halt, the PC does get set to 0xFFFFFFFC (please see below > ). But GDB still goes straight to 0x00000000. > > The BDI config file from the U-Boot manual only allocates 2MB of flash (the > re are 64MBs on this board). If I use this config file, the GDB goes to 0xd > eadbeef (but the BDI telnet shows the correct 0xFFFFFFFC for the PC after a > reset-halt). I don't understand what the flash mapping has to do with the operation of GDB? As long as all of the U-Boot image is mapped, everything should be fine. Also, I think the provided config file does map 4 MB at 0xFFC00000, doesn't it? > > Probably your BDI config file needs adjusting. Try what you see when > > you use the telnet interface directly, i. e. where do you end up > > after a "reset halt" ? > > > > Best regards, ... Please don't top-post / full-quote! > --_a74128a5-4aff-492d-8a22-57e20feb9b73_ > Content-Type: text/html; charsetÿindows-1252" > Content-Transfer-Encoding: quoted-printable And please do NOT post HTML here. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED] Anything free is worth what you pay for it. ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users
