Jean-Christophe PLAGNIOL-VILLARD wrote:
> On 13:33 Thu 05 Jun , Hugo Villeneuve wrote:
>> ARM: This patch adds support for the Lyrtech SFF-SDR
>> board, based on the TI DaVinci architecture (ARM926EJS).
>>
>> Changes between V5 and V6:
>> -New email address for contributor.
>> -Init of EMIF-A CS3 address space to load FPGA.
>> -Dynamic parsing of MAC address in EEPROM.
>> -Add boot delay of 5 sec.
>> -Use NFS for Linux boot command.
>> -Add relocate flag for command history.
>>
>> Signed-off-by: Hugo Villeneuve <[EMAIL PROTECTED]>
>> Signed-off-by: Philip Balister, OpenSDR <[EMAIL PROTECTED]>
>>
>> ---
>>
>> CREDITS | 5 +
>> + /* Set the Bus Priority Register to appropriate value */
>> + REG(VBPR) = 0x20; +
>> + timer_init();
>> +
>> + return(0);
>> +}
>> +
>
> Is it possible that you add a documentiation about the EEPROM content?
Hi Jean-Christophe,
unfortunately, I don´t have the data structure of the EEPROM, only the
algorithym to parse it to find the MAC address.
>> +
>> +/*=======*/
>> +/* Board */
>> +/*=======*/
> If Possible use this kind of comment style
> /*
> *
> */
Ok, I fixed it.
>> +#define LINUX_BOOT_PARAM_ADDR 0x80000100
>> +#define CONFIG_CMDLINE_TAG
>> +#define CONFIG_SETUP_MEMORY_TAGS
>> +#define CONFIG_BOOTARGS \
>> + "mem=56M " \
>> + "console=ttyS0,115200n8 " \
>> + "root=/dev/nfs rw noinitrd ip=dhcp " \
>> + "nfsroot=${serverip}:/nfsroot/sffsdr " \
>> + "nwhwconf=device:eth0,hwaddr:${ethaddr}"
>> +#define CONFIG_BOOTCOMMAND \
>> + "nand read 87A00000 100000 300000;" \
>> + "bootelf 87A00000"
> Could you align it or I will do it when I'll apply the patch,
> If it's ok with you.
Since I´m not sure how you want it to be aligned, please go ahead
and do it when you apply the patch as you suggested.
I¬m sending updated patch after this mail.
Thank-you, Hugo V.
Hugo Villeneuve
Hardware developer | Concepteur matériel
Lyrtech
Phone/Tél. : (1) (418) 877-4644 #2395
Toll-free/Sans frais - Canada & USA : (1) (888) 922-4644 #2395
Fax/Téléc. : (1) (418) 877-7710
www.lyrtech.com
Infinite possibilities...TM
-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users
