Wolfgang, of course I meant no offense - of course your patch is harmless.
The System (network camera) is running for nearly 2 years now. Last working version has been u-boot 1.2.x with a 2.6.19 kernel. Since we've moved to the latest kernel we need a more recent u-boot. This is what I did - and e1000 no longer works. Of course I diff'ed the network stuff - no obvious changes at all. So I wonder if the problem is elsewhere and if e1000 is still working in general. As you say this is obviously true - thanks. regards, Andre Wolfgang Grandegger schrieb: > Andre Schwarz wrote: >> Wolfgang, >> >> as far as I can see on the list you sent the latest patches for the >> e1000 driver. > > My patches just added some device ids, > > >> My e1000 (82541ER) stopped working on a MPC5200 based board with latest >> u-boot. >> I have a similar problem on another board ... >> >> Is your e1000 working properly on the latest u-boot ? > > Yes, on a MPC8548 board. I have not tested it on the MPC5200. > >> Do I need any additional defines or environment settings to get it >> working again ? >> >> Obviously it is - again :-[ - my fault or is related to my build system. > > I think there are some known problems with PCI on boards with a > MPC5200 Rev. A processor, e.g. my EEPRO100 card does not work on it. > What exactly does not work? > > Wolfgang. MATRIX VISION GmbH, Talstraße 16, DE-71570 Oppenweiler - Registergericht: Amtsgericht Stuttgart, HRB 271090 Geschäftsführer: Gerhard Thullner, Werner Armingeon, Uwe Furtner ------------------------------------------------------------------------- Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW! Studies have shown that voting for your favorite open source project, along with a healthy diet, reduces your potential for chronic lameness and boredom. Vote Now at http://www.sourceforge.net/community/cca08 _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users