Andre Schwarz wrote: > Wolfgang, > > of course I meant no offense - of course your patch is harmless.
No problem. > The System (network camera) is running for nearly 2 years now. > Last working version has been u-boot 1.2.x with a 2.6.19 kernel. > > Since we've moved to the latest kernel we need a more recent u-boot. > > This is what I did - and e1000 no longer works. > > Of course I diff'ed the network stuff - no obvious changes at all. > So I wonder if the problem is elsewhere and if e1000 is still working in > general. Have you read my previous mail? See below. > Wolfgang Grandegger schrieb: >> Andre Schwarz wrote: >>> Wolfgang, >>> >>> as far as I can see on the list you sent the latest patches for the >>> e1000 driver. >> My patches just added some device ids, >> >> >>> My e1000 (82541ER) stopped working on a MPC5200 based board with latest >>> u-boot. >>> I have a similar problem on another board ... >>> >>> Is your e1000 working properly on the latest u-boot ? >> Yes, on a MPC8548 board. I have not tested it on the MPC5200. >> >>> Do I need any additional defines or environment settings to get it >>> working again ? >>> >>> Obviously it is - again :-[ - my fault or is related to my build system. >> I think there are some known problems with PCI on boards with a >> MPC5200 Rev. A processor, e.g. my EEPRO100 card does not work on it. >> What exactly does not work? More information could be useful. Wolfgang. ------------------------------------------------------------------------- Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW! Studies have shown that voting for your favorite open source project, along with a healthy diet, reduces your potential for chronic lameness and boredom. Vote Now at http://www.sourceforge.net/community/cca08 _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users