Hello Stefan
If everyone agrees I can change the naming, no big problem there. > I would like to see if you can use the same style for 440 -> > CONFIG_XILINX_440. > I have no detail information about ppc440 but IMHO only virtex5 fx (or > whatever) support it -> > make no sense to me use virtex5 in name. > > SR: Do you agree with me? > > There is big part of code relate with interrupt controller which is the same > with microblaze. > This should be handled in the same way. Any suggestion? (Do generic driver?) I will suggest the creation of a new directory /drivers/interrupt/ And locate there the pic drivers > > :-( no use this loooooooooooooong value which comes from generated > xparameters.h. > SR:Am I understand correctly that 405 or 440 use 32 bits (64...) wide > interrupt controllers? I prefer using the xparameters.h values. IMO this helps the creation of the u-boot for a board Best regards and thanks for the comments -- Ricardo Ribalda http://www.eps.uam.es/~rribalda/ ------------------------------------------------------------------------- Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW! Studies have shown that voting for your favorite open source project, along with a healthy diet, reduces your potential for chronic lameness and boredom. Vote Now at http://www.sourceforge.net/community/cca08 _______________________________________________ U-Boot-Users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/u-boot-users
