Paul Gortmaker wrote: > The existing config doesn't define CONFIG_HAS_ETH0, and so the > fdt support doesn't update the zeros in the dtb local-mac with > real data from the u-boot env. Since the existing config is > tailored to just two interfaces, get rid of the ETH2 definitions > at the same time. > > Also don't include any end user specific data into the environment > by default -- things like MAC address, network parameters etc. need > to come from the end user. > > Signed-off-by: Paul Gortmaker <[EMAIL PROTECTED]> > Acked-by: Ben Warren <[EMAIL PROTECTED]> > --- > include/configs/sbc8560.h | 22 +++++++++++++--------- > 1 files changed, 13 insertions(+), 9 deletions(-) > > diff --git a/include/configs/sbc8560.h b/include/configs/sbc8560.h > index f07fbc0..f4408ad 100644 > --- a/include/configs/sbc8560.h > +++ b/include/configs/sbc8560.h > @@ -327,9 +327,8 @@ > #define CFG_ENV_SIZE 0x2000 > #endif > > -#define CONFIG_BOOTARGS "root=/dev/nfs rw nfsroot=192.168.0.251:/tftpboot > ip=192.168.0.105:192.168.0.251::255.255.255.0:sbc8560:eth0:off > console=ttyS0,9600" > +#define CONFIG_BOOTARGS "root=/dev/nfs rw ip=dhcp console=ttyS0,9600" > /*#define CONFIG_BOOTARGS "root=/dev/ram rw console=ttyS0,115200"*/ > -#define CONFIG_BOOTCOMMAND "bootm 0xff800000 0xffa00000" > #define CONFIG_BOOTDELAY 5 /* -1 disable autoboot */ > > #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ > @@ -405,19 +404,24 @@ > #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ > #endif > > -/*Note: change below for your network setting!!! */ > #if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC) > -# define CONFIG_ETHADDR 00:01:af:07:9b:8a > -# define CONFIG_HAS_ETH1 > -# define CONFIG_ETH1ADDR 00:01:af:07:9b:8b > -# define CONFIG_HAS_ETH2 > -# define CONFIG_ETH2ADDR 00:01:af:07:9b:8c > +#define CONFIG_HAS_ETH0 > +#define CONFIG_HAS_ETH1 > #endif > > +/* You can compile in a MAC address and your custom net settings by using > + * the * following syntax. Your board should be marked with the assigned > + * MAC addresses directly on it. > + */ > +#if 0 > +#define CONFIG_ETHADDR 00:01:af:07:9b:8a > +#define CONFIG_ETH1ADDR 00:01:af:07:9b:8b > #define CONFIG_SERVERIP 192.168.0.131 > #define CONFIG_IPADDR 192.168.0.105 > -#define CONFIG_GATEWAYIP 0.0.0.0 > +#define CONFIG_GATEWAYIP 192.168.0.1 > #define CONFIG_NETMASK 255.255.255.0 > +#endif > + > That's a good way of doing it. I know people generally don't like #if 0, but you're conveying useful information. > #define CONFIG_HOSTNAME SBC8560 > #define CONFIG_ROOTPATH /home/ppc > #define CONFIG_BOOTFILE pImage > regards, Ben
------------------------------------------------------------------------- Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW! Studies have shown that voting for your favorite open source project, along with a healthy diet, reduces your potential for chronic lameness and boredom. Vote Now at http://www.sourceforge.net/community/cca08 _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users
