In message <[EMAIL PROTECTED]> you wrote: > > +/* You can compile in a MAC address and your custom net settings by using > + * the * following syntax. Your board should be marked with the assigned ----------^
Bogus '*' here? > + * MAC addresses directly on it. > + */ > +#if 0 > +#define CONFIG_ETHADDR 00:01:af:07:9b:8a > +#define CONFIG_ETH1ADDR 00:01:af:07:9b:8b > #define CONFIG_SERVERIP 192.168.0.131 > #define CONFIG_IPADDR 192.168.0.105 > -#define CONFIG_GATEWAYIP 0.0.0.0 > +#define CONFIG_GATEWAYIP 192.168.0.1 > #define CONFIG_NETMASK 255.255.255.0 > +#endif > + I think this should be removed. There is really no good reason to add network configuration at all to the board config file (with the exception of the 2 or 3 boards which actually boot from real ROM). Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED] If in any problem you find yourself doing an immense amount of work, the answer can be obtained by simple inspection. ------------------------------------------------------------------------- Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW! Studies have shown that voting for your favorite open source project, along with a healthy diet, reduces your potential for chronic lameness and boredom. Vote Now at http://www.sourceforge.net/community/cca08 _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users
