On Wed, 16 Jul 2008 15:28:21 -0700
Ira Snyder <[EMAIL PROTECTED]> wrote:
> During the development, I noticed that adding and removing certain
> pieces of debugging code (which did not change any program state) caused
> the board to hang on boot, like so:
> ================================================================================
>
> U-Boot 1.3.4-rc1-00001-gb89881c-dirty (Jul 16 2008 - 14:54:56) MPC83XX
>
> Reset Status: External/Internal Soft, External/Internal Hard
>
> CPU: e300c1, MPC8349EA, Rev: 3.0 at 528 MHz, CSB: 264 MHz
> Board: Freescale MPC8349EMDS
> I2C:
try reverting this commit:
commit 1c3dd43338a077165e7e0309cb3994e65d2bdbf8
Author: Grant Likely <[EMAIL PROTECTED]>
Date: Tue Nov 13 22:18:33 2007 -0700
powerpc: Backout relocation changes.
Ugh. I *hate* to back this change out, but these compiler flags don't
work for relocation on all versions of GCC. I've not been able to
reproduce the environment in my setup (and hence, not been able to
find a combination that *does* work), so I've got no choice but to go
back to the old gcc flags and linker script.
Signed-off-by: Grant Likely <[EMAIL PROTECTED]>
Kim
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users
