Ira Snyder wrote:
> On Thu, Jul 17, 2008 at 04:54:53PM -0500, Kim Phillips wrote:
>> On Wed, 16 Jul 2008 15:28:21 -0700
>> Ira Snyder <[EMAIL PROTECTED]> wrote:
>>
>>> During the development, I noticed that adding and removing certain
>>> pieces of debugging code (which did not change any program state) caused
>>> the board to hang on boot, like so:
[snip]
>
> Hello Kim,
>
> Thanks for looking at this problem so quickly. I'll try reverting the
> patch as soon as I'm done writing this email and post the results here.
>
> I spent this afternoon trying to narrow down the problem exhibited by
> the changes in my earlier email. I managed to narrow it down to the
> .data section's start address being a multiple of 32 bytes, and the
> bcsr code in checkboard().
>
> I have attached a patch which causes my board to hang on boot in exactly
> the same way that the earlier patch does. Removing the line from the
> linker script makes the board boot perfectly, as long as the .data
> section's start address is not on a 32 byte boundary by coincidence.
>
> Ira
>
>
>
> diff --git a/board/freescale/mpc8349emds/mpc8349emds.c
> b/board/freescale/mpc8349emds/mpc8349emds.c
> index 9a312c3..f4792a9 100644
> --- a/board/freescale/mpc8349emds/mpc8349emds.c
> +++ b/board/freescale/mpc8349emds/mpc8349emds.c
> @@ -165,6 +165,13 @@ int fixed_sdram(void)
>
> int checkboard (void)
> {
> + volatile immap_t *immr = (immap_t *)CFG_IMMR;
> + volatile u8 *bcsr = (u8 *)CFG_BCSR;
> + int in_pci_slot;
> +
> + /* in a pci slot or standalone */
> + in_pci_slot = (bcsr[10] & 0x80) ? 1 : 0;
> +
> puts("Board: Freescale MPC8349EMDS\n");
> return 0;
> }
> diff --git a/cpu/mpc83xx/u-boot.lds b/cpu/mpc83xx/u-boot.lds
> index 99ad675..f605eab 100644
> --- a/cpu/mpc83xx/u-boot.lds
> +++ b/cpu/mpc83xx/u-boot.lds
> @@ -79,6 +79,7 @@ SECTIONS
> __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
> __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
>
> + . = ALIGN(32);
> .data :
> {
> *(.data)
Hi Ira,
This is a long shot, but could there be a problem with the DDR SDRAM
and/or its initialization? Are you using a factory-provided DIMM? What
if you try a different one (preferably a different brand/size)?
I'm not familiar with the board configuration, I presume instruction
caches are enabled. Are data caches enabled too? What happens if you
disable cache(s)?
Best regards,
gvb
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
U-Boot-Users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/u-boot-users
