In message <[EMAIL PROTECTED]> you wrote:
>
> I don't think that it is a problem with my board config, otherwhise
> it won't show the correct size using print_num...
> Maybe other users didn't have any problems because their memory
> size is smaller than 256MB.
There are many, many boards with bigger memory as well. And these
don't have problems either. For example:
U-Boot 1.3.4-rc1-00012-g1953d12 (Jul 21 2008 - 09:05:23)
CPU: AMCC PowerPC 440SPe Rev. B at 800 MHz (PLB=160, OPB=53, EBC=17 MHz)
RAID 6 support
Bootstrap Option D - Boot ROM Location I2C (Addr 0x50)
Internal PCI arbiter enabled
32 kB I-Cache 32 kB D-Cache
Board: Katmai - AMCC 440SPe Evaluation Board
I2C: ready
DTT: 1 is 27 C
DTT: 2 is 27 C
DRAM: 4 GB (ECC not enabled, 640 MHz, CL5)
FLASH: 16 MB
...
=> bdi
memstart = 0x00000000
memsize = 0x100000000
...
As you can see, this board has 4 GB of RAM and everything works just
fine.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED]
If you fail to plan, plan to fail.
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users
