For the record:
What Stefan says is completely true. Last version of u-boot does not give wrong info without my patch. Regards On Wed, Jul 30, 2008 at 07:54, Stefan Roese <[EMAIL PROTECTED]> wrote: > Ricardo, > > On Wednesday 30 July 2008, Ricardo Ribalda Delgado wrote: >> I don't think that it is a problem with my board config, otherwhise >> it won't show the correct size using print_num... >> Maybe other users didn't have any problems because their memory >> size is smaller than 256MB. > > Most likely you need to enable 64bit printf format (%ll) support: > > #define CFG_64BIT_VSPRINTF > #define CFG_64BIT_STRTOUL > > This is already done for all 440 PPC's (include/ppc4xx.h) in the current git > head. I'll merge this soon into the next branch of my ppc4xx repository, then > your problem should go away. > > Best regards, > Stefan > > ===================================================================== > DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel > HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany > Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: [EMAIL PROTECTED] > ===================================================================== > -- Ricardo Ribalda http://www.eps.uam.es/~rribalda/ ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users