Hello Stelian, > I gave your patches a run on an AT91CAP9 and had limited success with > them (usb seems to work, usb storage do not):
Does it work without the patches? Is it a regression, or still an improvement? > U-Boot> usb part > print_part of 0 > > Partition Map for USB device 0 -- Partition Type: DOS > > Partition Start Sector Num Sectors Type > 1 63 1974208 6 > > print_part of 1 > ## Unknown partition table These errors are normal, 'usb part' seems to look for primary partitions on a USB stick that is formatted as a floppy... > U-Boot> usb storage > Device 0: not available > > U-Boot> fatinfo usb 0:1 > > ** Invalid boot device ** I have no explanation for this error, it could be related to the filesystem on the USB stick itself. I do not see any errors that USB itself is not working, the problems I fixed were in the USB area, and they solved all the problems I encountered with USB sticks on AT91SAM9261 (OHCI) I would expect that it would work much better than before on your CPU... Unfortunately I do not have a test environment for AT91CAP9, so I cannot verify this issue here. Kind Regards, Remy _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot