Le vendredi 19 septembre 2008 à 11:16 +0200, Remy Bohmer a écrit :
> > I'll try to test on some other AT91SAM9 boards later today, if I find a
> > few minutes...
>
> Thanks, and I expect to hear some more positive news ;-)))
I'm afraid I have more bad news.
I updated my tree to the latest git. I use the ELDK 4.1 arm compiler.
Tested on an AT91SAM9263, with two different USB sticks:
U-Boot> usb reset
(Re)start USB...
USB: scanning bus for devices... ERROR: USB-error: DEVICENOTRESPONDING:
Device did not respond to token (IN) or did not provide a handshake (OUT) (5)
ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) or
did not provide a handshake (OUT) (5)
ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) or
did not provide a handshake (OUT) (5)
ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) or
did not provide a handshake (OUT) (5)
USB device not accepting new address (error=20)
2 USB Device(s) found
scanning bus for storage devices... 0 Storage Device(s) found
Without your 3 patches applied, I get:
U-Boot> usb start
(Re)start USB...
USB: scanning bus for devices...
USB device not responding, giving up (status=20)
2 USB Device(s) found
scanning bus for storage devices... 0 Storage Device(s) found
Stelian.
--
Stelian Pop <[EMAIL PROTECTED]>
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
