Hi Yuke, > What I am doing is to try to load RTEMS
Ok, that info helps. > It has a BSP for this board. Thats good. > All the tools I used are targeting powerpc and tailed > for this board. and those tools came from where? > But the final executable format is .exe. I am not sure if > this format is good to download and run on the > board using U-boot. I just happen to know there is a > mkimage utility from U-boot. Given a file test.exe, type file test.exe and it'll tell you if its a PowerPC .elf format. Before trying to get RTEMs running on the board, see if your tools can build U-Boot, and build the standard stand-alone application that exists in the examples folder. Here's some notes I wrote a while back for the 8349, which is in the same family as the 8313; http://www.ovro.caltech.edu/~dwh/carma_board/powerpc_mpc8349e.pdf Cheers, Dave _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot