Jerry Van Baren wrote: > David Hawkins wrote: >> Hi Yuke, > > [snip] > >> You say that the development is done with RHLE5, but >> then that a .exe is created. That seems to be a conflicting >> statement. Perhaps you could explain ... are you running >> the RTEMs tools under Wine?? > > The RTEMS "quickstart" example uses an .exe extension, so it looks > like Yuke's toolset is braindamaged. > <http://www.rtems.com/wiki/index.php/Quick_Start> > Example: > bash-3.1$ sparc-rtems4.9-gdb `find . -name ticker.exe` > (bleah!) > > The RTEMS example is running on a simulator via gdb, which is a far > cry from running on real hardware, booting either on bare metal (very > big ouch) or using u-boot to start it (much less ouch - I would start > by running your RTEMS build as a u-boot "application" - that gets you > things like fairly painless serial support). > > Note to Yuke: this will be a learning experience for you - please keep > us informed so we can learn vicariously with you. I'm not aware of > anybody using u-boot to boot RTEMS, so you may have some useful stuff > when you get to the end of your journey. We will help as much as we > can... > Thanks. It is true that RTEMS provide .exe for gdb simulation. But we do have BSP package and to build application for real board, like this mpc8313 board. I might need to figure out how to make better use of U-boot. But right now, I just want to use it to load image and get it run. The vendor already installed U-boot. I thought U-boot is just a bootloader. Never think about build RTEMS as u-boot application. It seems I misunderstood a lot. :-( >> Anyway, a good suggestion is to install ELDK and rebuild >> U-Boot and update it, even get Linux booted. It may not be >> your main goal, but consider it educational :) > > Note to Yuke: you should also have a JTAG debugger to recover from > failed u-boot reprogramming if you rebuild and reflash u-boot. You > may want to use a JTAG debugger even if you *don't* reflash u-boot. > > Note that the Abatron BDI3000 supports "gdb remote target". > <http://www.abatron.ch/products/bdi-family/bdi3000.html> > <http://www.abatron.ch/products/debugger-support/gnu-support.html> > I think most of the competitors do too now, but I don't know. > Definitely ask about their linux (as the host) and gdb (remote target > over ethernet) support before you buy. > > USB-attached JTAG debuggers tend to be Windows-only. Bleah! On a > positive note, I have a whole collection of single-board computers > (curiously labeled "USB TAP" ;-) with a MPC866, usb, and JTAG > interface. If only I had the time to port u-boot to them and make > them useful... :-D > >> Cheers, >> Dave > > Best regards, > gvb >
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot