The following improvements are made:
- document bootvx in README
- fix size too small by one in sprintf
- changed old (pre 2004) device name ibmEmac to emac
- boot device may be overriden in board config
- servername may be defined in board config
- additional parameters may be defined in board config
- fixed some line wrappings
- changed netstal-common.h to use the new settings
---
README | 17 ++++++++
common/cmd_elf.c | 80 ++++++++++++++++++--------------------
include/configs/netstal-common.h | 29 +++++++-------
3 files changed, 69 insertions(+), 57 deletions(-)
diff --git a/README b/README
index ebee20f..99d2a3d 100644
--- a/README
+++ b/README
@@ -379,6 +379,23 @@ The following options need to be configured:
This define fills in the correct boot CPU in the boot
param header, the default value is zero if undefined.
+- vxWorks boot parameters:
+
+ bootvx constructs a valid bootline using the following
+ environments variables: bootfile, ipaddr, serverip, hostname.
+ It loads the vxWorks image pointed bootfile.
+
+ CONFIG_SYS_VXWORKS_BOOT_DEVICE - The vxworks device name
+ CONFIG_SYS_VXWORKS_MAC_PTR - Ethernet 6 byte MA -address
+ CONFIG_SYS_VXWORKS_SERVERNAME - Name of the server
+
+ CONFIG_SYS_VXWORKS_ADD_PARAMS
+
+ Add it at the end of the bootline. E.g "u=username pw=secret"
+
+ Note: If a "bootargs" environment is defined, it will overwride
+ the defaults discussed just above.
+
- Serial Ports:
CONFIG_PL010_SERIAL
diff --git a/common/cmd_elf.c b/common/cmd_elf.c
index 3ebb6d9..d537478 100644
--- a/common/cmd_elf.c
+++ b/common/cmd_elf.c
@@ -102,10 +102,8 @@ int do_bootvx (cmd_tbl_t *cmdtp, int flag, int argc, char
*argv[])
unsigned long bootaddr; /* Address to put the bootline */
char *bootline; /* Text of the bootline */
char *tmp; /* Temporary char pointer */
+ char build_buf[128]; /* Buffer for building the bootline */
-#if defined(CONFIG_4xx) || defined(CONFIG_IOP480)
- char build_buf[80]; /* Buffer for building the bootline */
-#endif
/* -------------------------------------------------- */
/*
@@ -124,7 +122,8 @@ int do_bootvx (cmd_tbl_t *cmdtp, int flag, int argc, char
*argv[])
if ((argc == 2) && (strcmp (argv[1], "tftp") == 0)) {
if (NetLoop (TFTP) <= 0)
return 1;
- printf ("Automatic boot of VxWorks image at address 0x%08lx ...
\n", addr);
+ printf ("Automatic boot of VxWorks image at address 0x%08lx ...
\n",
+ addr);
}
#endif
@@ -163,54 +162,53 @@ int do_bootvx (cmd_tbl_t *cmdtp, int flag, int argc, char
*argv[])
*/
if ((bootline = getenv ("bootargs")) != NULL) {
- memcpy ((void *) bootaddr, bootline, MAX(strlen(bootline),
255));
- flush_cache (bootaddr, MAX(strlen(bootline), 255));
+ memcpy ((void *) bootaddr, bootline,
+ MAX (strlen (bootline), 255));
+ flush_cache (bootaddr, MAX (strlen (bootline), 255));
} else {
+
+#ifndef CONFIG_SYS_VXWORKS_BOOT_DEVICE
#if defined(CONFIG_4xx)
- sprintf (build_buf, "ibmEmac(0,0)");
+#define CONFIG_SYS_VXWORKS_BOOT_DEVICE "emac(0,0)"
+#elif defined(CONFIG_IOP480)
+#define CONFIG_SYS_VXWORKS_BOOT_DEVICE "dc(0,0)"
+#else
+#define CONFIG_SYS_VXWORKS_BOOT_DEVICE "eth(0,0)"
+#endif
+#endif
- if ((tmp = getenv ("hostname")) != NULL) {
- sprintf (&build_buf[strlen (build_buf - 1)],
- "host:%s ", tmp);
+#ifndef CONFIG_SYS_VXWORKS_SERVERNAME
+#define CONFIG_SYS_VXWORKS_SERVERNAME srv
+#endif
+
+ sprintf (build_buf, CONFIG_SYS_VXWORKS_BOOT_DEVICE);
+ if ((tmp = getenv ("bootfile")) != NULL) {
+ sprintf (&build_buf[strlen (build_buf)],
+ "%s:%s ", CONFIG_SYS_VXWORKS_SERVERNAME, tmp);
} else {
- sprintf (&build_buf[strlen (build_buf - 1)],
- ": ");
+ sprintf (&build_buf[strlen (build_buf)],
+ "%s:file ", CONFIG_SYS_VXWORKS_SERVERNAME);
}
if ((tmp = getenv ("ipaddr")) != NULL) {
- sprintf (&build_buf[strlen (build_buf - 1)],
- "e=%s ", tmp);
+ sprintf (&build_buf[strlen (build_buf)], "e=%s ", tmp);
}
- memcpy ((void *)bootaddr, build_buf, MAX(strlen(build_buf),
255));
- flush_cache (bootaddr, MAX(strlen(build_buf), 255));
-#elif defined(CONFIG_IOP480)
- sprintf (build_buf, "dc(0,0)");
- if ((tmp = getenv ("hostname")) != NULL) {
- sprintf (&build_buf[strlen (build_buf - 1)],
- "host:%s ", tmp);
- } else {
- sprintf (&build_buf[strlen (build_buf - 1)],
- ": ");
+ if ((tmp = getenv ("serverip")) != NULL) {
+ sprintf (&build_buf[strlen (build_buf)], "h=%s ", tmp);
}
- if ((tmp = getenv ("ipaddr")) != NULL) {
- sprintf (&build_buf[strlen (build_buf - 1)],
- "e=%s ", tmp);
+ if ((tmp = getenv ("hostname")) != NULL) {
+ sprintf (&build_buf[strlen (build_buf)], "tn=%s ", tmp);
}
- memcpy ((void *) bootaddr, build_buf, MAX(strlen(build_buf),
255));
- flush_cache (bootaddr, MAX(strlen(build_buf), 255));
-#else
-
- /*
- * I'm not sure what the device should be for other
- * PPC flavors, the hostname and ipaddr should be ok
- * to just copy
- */
-
- puts ("No bootargs defined\n");
- return 1;
+#ifdef CONFIG_SYS_VXWORKS_ADD_PARAMS
+ sprintf (&build_buf[strlen (build_buf)],
+ CONFIG_SYS_VXWORKS_ADD_PARAMS);
#endif
+
+ memcpy ((void *) bootaddr, build_buf,
+ MAX (strlen (build_buf), 255));
+ flush_cache (bootaddr, MAX (strlen (build_buf), 255));
}
/*
@@ -255,8 +253,7 @@ int valid_elf_image (unsigned long addr)
}
if (ehdr->e_type != ET_EXEC) {
- printf ("## Not a 32-bit elf image at address 0x%08lx\n",
- addr);
+ printf ("## Not a 32-bit elf image at address 0x%08lx\n", addr);
return 0;
}
@@ -271,7 +268,6 @@ int valid_elf_image (unsigned long addr)
return 1;
}
-
/* ======================================================================
* A very simple elf loader, assumes the image is valid, returns the
* entry point address.
diff --git a/include/configs/netstal-common.h b/include/configs/netstal-common.h
index 1fa4b00..7f2b015 100644
--- a/include/configs/netstal-common.h
+++ b/include/configs/netstal-common.h
@@ -201,8 +201,9 @@
#define CONFIG_ETHADDR 00:60:13:00:00:00 /* Netstal Machines AG MAC */
#define CONFIG_OVERWRITE_ETHADDR_ONCE
-#define CONFIG_SYS_TFTP_LOADADDR 0x01000000
-
+#define CONFIG_SYS_TFTP_LOADADDR 0x01000000
+#define CONFIG_SYS_VXWORKS_ADD_PARAMS "u=dpu pw=netstal8752"
+#define CONFIG_SYS_VXWORKS_SERVERNAME "c"
/*
* General common environment variables shared by all boards produced by
Netstal Maschinen
*/
@@ -222,19 +223,17 @@
"fdt_addr_r=800000\0" \
"hostname=" xstr(CONFIG_HOSTNAME) "\0" \
"bootfile=" xstr(CONFIG_HOSTNAME) "/uImage\0" \
- "load=tftp 200000 " xstr(CONFIG_HOSTNAME) "/u-boot.bin\0" \
- "update=protect off " xstr(CONFIG_SYS_MONITOR_BASE) " FFFFFFFF;"
\
- "era " xstr(CONFIG_SYS_MONITOR_BASE) " FFFFFFFF;"
\
- "cp.b ${fileaddr} " xstr(CONFIG_SYS_MONITOR_BASE) "
${filesize};" \
- "setenv filesize\0" \
- "upd=run load update\0" \
- "vx_rom=" xstr(CONFIG_HOSTNAME) "/" \
- xstr(CONFIG_HOSTNAME) "_vx_rom\0" \
- "vx=tftp " xstr(CONFIG_SYS_TFTP_LOADADDR) " ${vx_rom};run vxargs;"
\
- "bootvx\0" \
- "vxargs=setenv bootargs emac(0,0)c:${vx_rom} e=${ipaddr}" \
- " h=${serverip} u=dpu pw=netstal8752 " \
- "tn=" xstr(CONFIG_HOSTNAME) " f=0x3008\0" \
+ "uload=tftp " xstr(CONFIG_SYS_TFTP_LOADADDR) " " \
+ xstr(CONFIG_HOSTNAME) "/u-boot.bin\0" \
+ "vx_rom=" xstr(CONFIG_HOSTNAME) "/" \
+ xstr(CONFIG_HOSTNAME) "_vx_rom\0" \
+ "update=protect off " xstr(CONFIG_SYS_MONITOR_BASE) " FFFFFFFF;"\
+ "era " xstr(CONFIG_SYS_MONITOR_BASE) " FFFFFFFF;" \
+ "cp.b ${fileaddr} "xstr(CONFIG_SYS_MONITOR_BASE) \
+ " ${filesize}; setenv filesize\0" \
+ "upd=run uload update\0" \
+ "vx=setenv bootfile ${vx_rom}; tftp " \
+ xstr(CONFIG_SYS_TFTP_LOADADDR) "; bootvx\0" \
CONFIG_NETSTAL_DEF_ENV_ROOTPATH
/*
--
1.5.4.3
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
