This patch enumerates dwmci and set auto stop command during
dwmci initialisation.
EMMC read/write is not happening in current implementation
due to improper fifo size computation. Hence Modified the fifo size
computation to resolve EMMC read write issues.

Changes from V1:
        1)Created the macros RX_WMARK_SHIFT and RX_WMARK_MASK in header file.

Changes from V2:
        1)Updation of commit message and resubmition of proper patch set.

Signed-off-by: Amar <amarendra...@samsung.com>
---
 drivers/mmc/dw_mmc.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/drivers/mmc/dw_mmc.c b/drivers/mmc/dw_mmc.c
index 4070d4e..d8fa1a2 100644
--- a/drivers/mmc/dw_mmc.c
+++ b/drivers/mmc/dw_mmc.c
@@ -136,6 +136,7 @@ static int dwmci_send_cmd(struct mmc *mmc, struct mmc_cmd 
*cmd,
                        return TIMEOUT;
                }
                timeout--;
+               mdelay(1);
        }
 
        dwmci_writel(host, DWMCI_RINTSTS, DWMCI_INTMSK_ALL);
@@ -314,7 +315,7 @@ static void dwmci_set_ios(struct mmc *mmc)
 static int dwmci_init(struct mmc *mmc)
 {
        struct dwmci_host *host = (struct dwmci_host *)mmc->priv;
-       u32 fifo_size, fifoth_val;
+       u32 fifo_size, fifoth_val, ier;
 
        dwmci_writel(host, DWMCI_PWREN, 1);
 
@@ -323,6 +324,14 @@ static int dwmci_init(struct mmc *mmc)
                return -1;
        }
 
+       /* Enumerate at 400KHz */
+       dwmci_setup_bus(host, mmc->f_min);
+
+       /* Set auto stop command */
+       ier = dwmci_readl(host, DWMCI_CTRL);
+       ier |= (1<<10);
+       dwmci_writel(host, DWMCI_CTRL, ier);
+
        dwmci_writel(host, DWMCI_RINTSTS, 0xFFFFFFFF);
        dwmci_writel(host, DWMCI_INTMASK, 0);
 
@@ -332,10 +341,11 @@ static int dwmci_init(struct mmc *mmc)
        dwmci_writel(host, DWMCI_BMOD, 1);
 
        fifo_size = dwmci_readl(host, DWMCI_FIFOTH);
+       fifo_size = ((fifo_size & RX_WMARK_MASK) >> RX_WMARK_SHIFT) + 1;
        if (host->fifoth_val)
                fifoth_val = host->fifoth_val;
        else
-               fifoth_val = MSIZE(0x2) | RX_WMARK(fifo_size/2 -1) |
+               fifoth_val = MSIZE(0x2) | RX_WMARK(fifo_size/2 - 1) |
                        TX_WMARK(fifo_size/2);
        dwmci_writel(host, DWMCI_FIFOTH, fifoth_val);
 
-- 
1.8.0

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to