This patch adds DWMMC device node data for exynos5. This patch also adds binding file for DWMMC device node.
Signed-off-by: Vivek Gautam <gautam.vi...@samsung.com> Signed-off-by: Amar <amarendra...@samsung.com> --- Changes since V1: 1)Added binding file for DWMMC device node at the location "doc/device-tree-bindings/exynos/dwmmc.txt". 2)Removed the propname 'index' from device node. 3)Prefixed the vendor name 'samsung' before propname in device node. Changes since V2: 1)Updation of commit message and resubmition of proper patch set. Changes since V3: No change. Changes since V4: 1)Updated the doc/device-tree-bindings/exynos/dwmmc.txt with more information regarding the property 'samsung,timing'. 2)Replaced the name 'dwmmc' with 'mmc'. arch/arm/dts/exynos5250.dtsi | 31 +++++++++++++++++++ board/samsung/dts/exynos5250-smdk5250.dts | 22 ++++++++++++++ doc/device-tree-bindings/exynos/dwmmc.txt | 49 +++++++++++++++++++++++++++++++ 3 files changed, 102 insertions(+) create mode 100644 doc/device-tree-bindings/exynos/dwmmc.txt diff --git a/arch/arm/dts/exynos5250.dtsi b/arch/arm/dts/exynos5250.dtsi index ed8c8dd..6c08eb7 100644 --- a/arch/arm/dts/exynos5250.dtsi +++ b/arch/arm/dts/exynos5250.dtsi @@ -151,4 +151,35 @@ }; }; + mmc@12200000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,exynos5250-dwmmc"; + reg = <0x12200000 0x1000>; + interrupts = <0 75 0>; + }; + + mmc@12210000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,exynos5250-dwmmc"; + reg = <0x12210000 0x1000>; + interrupts = <0 76 0>; + }; + + mmc@12220000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,exynos5250-dwmmc"; + reg = <0x12220000 0x1000>; + interrupts = <0 77 0>; + }; + + mmc@12230000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,exynos5250-dwmmc"; + reg = <0x12230000 0x1000>; + interrupts = <0 78 0>; + }; }; diff --git a/board/samsung/dts/exynos5250-smdk5250.dts b/board/samsung/dts/exynos5250-smdk5250.dts index cbfab6f..1d3e42b 100644 --- a/board/samsung/dts/exynos5250-smdk5250.dts +++ b/board/samsung/dts/exynos5250-smdk5250.dts @@ -30,6 +30,10 @@ spi2 = "/spi@12d40000"; spi3 = "/spi@131a0000"; spi4 = "/spi@131b0000"; + mmc0 = "/mmc@12200000"; + mmc1 = "/mmc@12210000"; + mmc2 = "/mmc@12220000"; + mmc3 = "/mmc@12230000"; }; sromc@12250000 { @@ -66,4 +70,22 @@ compatible = "maxim,max77686_pmic"; }; }; + + mmc@12200000 { + samsung,bus-width = <8>; + samsung,timing = <1 3 3>; + }; + + mmc@12210000 { + status = "disabled"; + }; + + mmc@12220000 { + samsung,bus-width = <4>; + samsung,timing = <1 2 3>; + }; + + mmc@12230000 { + status = "disabled"; + }; }; diff --git a/doc/device-tree-bindings/exynos/dwmmc.txt b/doc/device-tree-bindings/exynos/dwmmc.txt new file mode 100644 index 0000000..0054ace --- /dev/null +++ b/doc/device-tree-bindings/exynos/dwmmc.txt @@ -0,0 +1,49 @@ +* Exynos 5250 DWC_mobile_storage + +The Exynos 5250 provides DWC_mobile_storage interface which supports +. Embedded Multimedia Cards (EMMC-version 4.5) +. Secure Digital memory (SD mem-version 2.0) +. Secure Digital I/O (SDIO-version 3.0) +. Consumer Electronics Advanced Transport Architecture (CE-ATA-version 1.1) + +The Exynos 5250 DWC_mobile_storage provides four channels. +SOC specific and Board specific properties are channel specific. + +Required SoC Specific Properties: + +- compatible: should be + - samsung,exynos5250-dwmmc: for exynos5250 platforms + +- reg: physical base address of the controller and length of memory mapped + region. + +- interrupts: The interrupt number to the cpu. + +Required Board Specific Properties: + +- #address-cells: should be 1. +- #size-cells: should be 0. +- samsung,bus-width: The width of the bus used to interface the devices + supported by DWC_mobile_storage (SD-MMC/EMMC/SDIO). + . Typically the bus width is 4 or 8. +- samsung,timing: The timing values to be written into the + Drv/sample clock selection register of corresponding channel. + . It is comprised of 3 values corresponding to the 3 fileds + 'SelClk_sample', 'SelClk_drv' and 'DIVRATIO' of CLKSEL register. + . SelClk_sample: Select sample clock among 8 shifted clocks. + . SelClk_drv: Select drv clock among 8 shifted clocks. + . DIVRATIO: Clock Divide ratio select. + . The above 3 values are used by the clock phase shifter. + +Example: + +mmc@12200000 { + samsung,bus-width = <8>; + samsung,timing = <1 3 3>; +} +In the above example, + . The bus width is 8 + . Timing is comprised of 3 values as explained below + 1 - SelClk_sample + 3 - SelClk_drv + 3 - DIVRATIO -- 1.8.0 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot