Acked-by: Jaehoon Chung <jh80.ch...@samsung.com> On 01/21/2013 08:43 PM, Amar wrote: > This patch adds DWMMC device node data for exynos5. > This patch also adds binding file for DWMMC device node. > > Signed-off-by: Vivek Gautam <gautam.vi...@samsung.com> > Signed-off-by: Amar <amarendra...@samsung.com> > --- > Changes since V1: > 1)Added binding file for DWMMC device node at the location > "doc/device-tree-bindings/exynos/dwmmc.txt". > 2)Removed the propname 'index' from device node. > 3)Prefixed the vendor name 'samsung' before propname in device node. > > Changes since V2: > 1)Updation of commit message and resubmition of proper patch set. > > Changes since V3: > No change. > > Changes since V4: > 1)Updated the doc/device-tree-bindings/exynos/dwmmc.txt with more > information regarding the property 'samsung,timing'. > 2)Replaced the name 'dwmmc' with 'mmc'. > > arch/arm/dts/exynos5250.dtsi | 31 +++++++++++++++++++ > board/samsung/dts/exynos5250-smdk5250.dts | 22 ++++++++++++++ > doc/device-tree-bindings/exynos/dwmmc.txt | 49 > +++++++++++++++++++++++++++++++ > 3 files changed, 102 insertions(+) > create mode 100644 doc/device-tree-bindings/exynos/dwmmc.txt > > diff --git a/arch/arm/dts/exynos5250.dtsi b/arch/arm/dts/exynos5250.dtsi > index ed8c8dd..6c08eb7 100644 > --- a/arch/arm/dts/exynos5250.dtsi > +++ b/arch/arm/dts/exynos5250.dtsi > @@ -151,4 +151,35 @@ > }; > }; > > + mmc@12200000 { > + #address-cells = <1>; > + #size-cells = <0>; > + compatible = "samsung,exynos5250-dwmmc"; > + reg = <0x12200000 0x1000>; > + interrupts = <0 75 0>; > + }; > + > + mmc@12210000 { > + #address-cells = <1>; > + #size-cells = <0>; > + compatible = "samsung,exynos5250-dwmmc"; > + reg = <0x12210000 0x1000>; > + interrupts = <0 76 0>; > + }; > + > + mmc@12220000 { > + #address-cells = <1>; > + #size-cells = <0>; > + compatible = "samsung,exynos5250-dwmmc"; > + reg = <0x12220000 0x1000>; > + interrupts = <0 77 0>; > + }; > + > + mmc@12230000 { > + #address-cells = <1>; > + #size-cells = <0>; > + compatible = "samsung,exynos5250-dwmmc"; > + reg = <0x12230000 0x1000>; > + interrupts = <0 78 0>; > + }; > }; > diff --git a/board/samsung/dts/exynos5250-smdk5250.dts > b/board/samsung/dts/exynos5250-smdk5250.dts > index cbfab6f..1d3e42b 100644 > --- a/board/samsung/dts/exynos5250-smdk5250.dts > +++ b/board/samsung/dts/exynos5250-smdk5250.dts > @@ -30,6 +30,10 @@ > spi2 = "/spi@12d40000"; > spi3 = "/spi@131a0000"; > spi4 = "/spi@131b0000"; > + mmc0 = "/mmc@12200000"; > + mmc1 = "/mmc@12210000"; > + mmc2 = "/mmc@12220000"; > + mmc3 = "/mmc@12230000"; > }; > > sromc@12250000 { > @@ -66,4 +70,22 @@ > compatible = "maxim,max77686_pmic"; > }; > }; > + > + mmc@12200000 { > + samsung,bus-width = <8>; > + samsung,timing = <1 3 3>; > + }; > + > + mmc@12210000 { > + status = "disabled"; > + }; > + > + mmc@12220000 { > + samsung,bus-width = <4>; > + samsung,timing = <1 2 3>; > + }; > + > + mmc@12230000 { > + status = "disabled"; > + }; > }; > diff --git a/doc/device-tree-bindings/exynos/dwmmc.txt > b/doc/device-tree-bindings/exynos/dwmmc.txt > new file mode 100644 > index 0000000..0054ace > --- /dev/null > +++ b/doc/device-tree-bindings/exynos/dwmmc.txt > @@ -0,0 +1,49 @@ > +* Exynos 5250 DWC_mobile_storage > + > +The Exynos 5250 provides DWC_mobile_storage interface which supports > +. Embedded Multimedia Cards (EMMC-version 4.5) > +. Secure Digital memory (SD mem-version 2.0) > +. Secure Digital I/O (SDIO-version 3.0) > +. Consumer Electronics Advanced Transport Architecture (CE-ATA-version 1.1) > + > +The Exynos 5250 DWC_mobile_storage provides four channels. > +SOC specific and Board specific properties are channel specific. > + > +Required SoC Specific Properties: > + > +- compatible: should be > + - samsung,exynos5250-dwmmc: for exynos5250 platforms > + > +- reg: physical base address of the controller and length of memory mapped > + region. > + > +- interrupts: The interrupt number to the cpu. > + > +Required Board Specific Properties: > + > +- #address-cells: should be 1. > +- #size-cells: should be 0. > +- samsung,bus-width: The width of the bus used to interface the devices > + supported by DWC_mobile_storage (SD-MMC/EMMC/SDIO). > + . Typically the bus width is 4 or 8. > +- samsung,timing: The timing values to be written into the > + Drv/sample clock selection register of corresponding channel. > + . It is comprised of 3 values corresponding to the 3 fileds > + 'SelClk_sample', 'SelClk_drv' and 'DIVRATIO' of CLKSEL register. > + . SelClk_sample: Select sample clock among 8 shifted clocks. > + . SelClk_drv: Select drv clock among 8 shifted clocks. > + . DIVRATIO: Clock Divide ratio select. > + . The above 3 values are used by the clock phase shifter. > + > +Example: > + > +mmc@12200000 { > + samsung,bus-width = <8>; > + samsung,timing = <1 3 3>; > +} > +In the above example, > + . The bus width is 8 > + . Timing is comprised of 3 values as explained below > + 1 - SelClk_sample > + 3 - SelClk_drv > + 3 - DIVRATIO >
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot