Dear Fabio Estevam, [...]
> > @@ -574,8 +574,8 @@ static int mx28_create_sd_image(int infd, int outfd) > > > > cb->drv_info[0].chip_num = 0x0; > > cb->drv_info[0].drive_type = 0x0; > > cb->drv_info[0].tag = 0x1; > > > > - cb->drv_info[0].first_sector_number = sd_sector + 1; > > - cb->drv_info[0].sector_count = (size - 1) / 512; > > + cb->drv_info[0].first_sector_number = sd_sector + 4; > > + cb->drv_info[0].sector_count = (size - 4) / 512; > > > > wr_size = write(outfd, buf, size); > > if (wr_size != size) { > > My mx28evk does not boot with this patch applied. Can you add this section to arch/arm/cpu/arm926ejs/mxs/u-boot-imx28.bd -->8-- options { driveTag = 0x00; flags = 0x01; } --8<-- and paste the output you get on serial port? the flags = 1 should enable debug output from the bootrom. Best regards, Marek Vasut _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot