This patchset adds device-tree support to the Tegra MMC driver. All device config is done via properties in the DT files instead of hard-coded config options/function arguments.
I've tested this on my Seaboard and everything works fine, including card detect. For the other T20 boards, I've used the Linux kernel DTS files for the sdhci nodes where there wasn't one already, or expanded the info that was already there. Everything builds fine, but I haven't tested anything but Seaboard. Tom Warren (2): Tegra: fdt: Add/enhance sdhci (mmc) nodes for all T20 DT files Tegra: MMC: Add DT support to MMC driver for all T20 boards arch/arm/dts/tegra20.dtsi | 12 ++ arch/arm/include/asm/arch-tegra/mmc.h | 2 +- arch/arm/include/asm/arch-tegra/tegra_mmc.h | 12 +- board/avionic-design/common/tamonten.c | 4 +- board/avionic-design/dts/tegra20-medcom-wide.dts | 9 + board/avionic-design/dts/tegra20-plutux.dts | 9 + board/avionic-design/dts/tegra20-tec.dts | 9 + board/compal/dts/tegra20-paz00.dts | 22 +++- board/compal/paz00/paz00.c | 14 +- board/compulab/dts/tegra20-trimslice.dts | 17 ++ board/compulab/trimslice/trimslice.c | 10 +- board/nvidia/dts/tegra20-harmony.dts | 21 +++ board/nvidia/dts/tegra20-seaboard.dts | 19 ++- board/nvidia/dts/tegra20-ventana.dts | 23 +++ board/nvidia/dts/tegra20-whistler.dts | 16 ++ board/nvidia/harmony/harmony.c | 12 +- board/nvidia/seaboard/seaboard.c | 14 +- board/nvidia/whistler/whistler.c | 4 +- board/toradex/colibri_t20_iris/colibri_t20_iris.c | 2 +- board/toradex/dts/tegra20-colibri_t20_iris.dts | 8 + drivers/mmc/tegra_mmc.c | 186 ++++++++++++++------- include/fdtdec.h | 1 + lib/fdtdec.c | 1 + 23 files changed, 322 insertions(+), 105 deletions(-) _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
