Hi Tom, Am Montag, 4. Februar 2013, 16:48:55 schrieb Tom Warren: > tegra_mmc_init() now uses DT info for bus width, WP/CD GPIOs, etc. > Tested on Seaboard, fully functional. > > Signed-off-by: Tom Warren <twar...@nvidia.com> > --- > arch/arm/include/asm/arch-tegra/mmc.h | 2 +- > arch/arm/include/asm/arch-tegra/tegra_mmc.h | 12 +- > board/avionic-design/common/tamonten.c | 4 +- > board/compal/paz00/paz00.c | 14 +- > board/compulab/trimslice/trimslice.c | 10 +- > board/nvidia/harmony/harmony.c | 12 +- > board/nvidia/seaboard/seaboard.c | 14 +- > board/nvidia/whistler/whistler.c | 4 +- > board/toradex/colibri_t20_iris/colibri_t20_iris.c | 2 +- > drivers/mmc/tegra_mmc.c | 186 > ++++++++++++++------- include/fdtdec.h | > 1 + > lib/fdtdec.c | 1 + > 12 files changed, 165 insertions(+), 97 deletions(-) > > [...] > > diff --git a/board/compal/paz00/paz00.c b/board/compal/paz00/paz00.c > index 1447f47..5cee91a 100644 > --- a/board/compal/paz00/paz00.c > +++ b/board/compal/paz00/paz00.c > @@ -55,18 +55,18 @@ static void pin_mux_mmc(void) > /* this is a weak define that we are overriding */ > int board_mmc_init(bd_t *bd) > { > - debug("board_mmc_init called\n"); > + debug("%s called\n", __func__); > > /* Enable muxes, etc. for SDMMC controllers */ > pin_mux_mmc(); > > - debug("board_mmc_init: init eMMC\n"); > - /* init dev 0, eMMC chip, with 8-bit bus */ > - tegra_mmc_init(0, 8, -1, -1); > + debug("%s: init eMMC\n", __func__); > + /* init dev 0, eMMC chip */ > + tegra_mmc_init(0);
This looks wrong because the sd is on sdmmc0 > > - debug("board_mmc_init: init SD slot\n"); > - /* init dev 3, SD slot, with 4-bit bus */ > - tegra_mmc_init(3, 4, GPIO_PV1, GPIO_PV5); > + debug("%s: init SD slot\n", __func__); > + /* init dev 3, SD slot */ > + tegra_mmc_init(3); and the emmc on sdmmc3. The DTS is correct. Not your fault as it seems to be wrong in the original code already. I guess it didn't made large difference but may in the future. I wonder how to test this though. Marc _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot