This adds call to tmu_init() and TMU boot time analysis
for the SoC temperature threshold breach.
Signed-off-by: Akshay Saraswat <aksha...@samsung.com>
Acked-by: Simon Glass <s...@chromium.org>
---
Changes since v10:
- None.
board/samsung/smdk5250/smdk5250.c | 39 +++++++++++++++++++++++++++++++++++++++
1 file changed, 39 insertions(+)
diff --git a/board/samsung/smdk5250/smdk5250.c
b/board/samsung/smdk5250/smdk5250.c
index ffc5ee5..89247d9 100644
--- a/board/samsung/smdk5250/smdk5250.c
+++ b/board/samsung/smdk5250/smdk5250.c
@@ -37,9 +37,39 @@
#include <asm/arch/dp_info.h>
#include <power/pmic.h>
#include <power/max77686_pmic.h>
+#include <tmu.h>
DECLARE_GLOBAL_DATA_PTR;
+#if defined CONFIG_EXYNOS_TMU
+/*
+ * Boot Time Thermal Analysis for SoC temperature threshold breach
+ */
+static void boot_temp_check(void)
+{
+ int temp;
+
+ switch (tmu_monitor(&temp)) {
+ /* Status TRIPPED ans WARNING means corresponding threshold breach */
+ case TMU_STATUS_TRIPPED:
+ puts("EXYNOS_TMU: TRIPPING! Device power going down ...\n");
+ set_ps_hold_ctrl();
+ hang();
+ break;
+ case TMU_STATUS_WARNING:
+ puts("EXYNOS_TMU: WARNING! Temperature very high\n");
+ break;
+ /*
+ * TMU_STATUS_INIT means something is wrong with temperature sensing
+ * and TMU status was changed back from NORMAL to INIT.
+ */
+ case TMU_STATUS_INIT:
+ default:
+ debug("EXYNOS_TMU: Unknown TMU state\n");
+ }
+}
+#endif
+
#ifdef CONFIG_USB_EHCI_EXYNOS
int board_usb_vbus_init(void)
{
@@ -59,6 +89,15 @@ int board_usb_vbus_init(void)
int board_init(void)
{
gd->bd->bi_boot_params = (PHYS_SDRAM_1 + 0x100UL);
+
+#if defined CONFIG_EXYNOS_TMU
+ if (tmu_init(gd->fdt_blob) != TMU_STATUS_NORMAL) {
+ debug("%s: Failed to init TMU\n", __func__);
+ return -1;
+ }
+ boot_temp_check();
+#endif
+
#ifdef CONFIG_EXYNOS_SPI
spi_init();
#endif
--
1.8.0
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
