Dear Stefan Roese, In message <1360239011-1852-1-git-send-email...@denx.de> you wrote: > This patch adds the a4m2k MPC5200B board port. Its a derivate of > the a3m071 board with only minor changes. > > Additionally this patch includes some clean-up changes: > - Remove I2C support from a3m071 as its unused > - Fix/enhance default env variables > - Fix some comments > - Add newly introduced CONFIG_SPL_TARGET to automatically build > "u-boot-img.bin" > - Fix dtb patching in READ desciption for SPL Linux booting: > "fdt chosen" needs to get called to patch/create the chosen node. > - Add missing call to spl_board_init(): > Define CONFIG_SPL_BOARD_INIT so that spl_board_init() will get > called in the SPL version. > > Signed-off-by: Stefan Roese <s...@denx.de> > --- > v3: > - Fix dtb patching in READ desciption for SPL Linux booting > - Add missing call to spl_board_init() > > v2: > - Enable CAN1 on I2C in GPS Port Configuration for a4m2k > > MAINTAINERS | 1 + > board/a3m071/README | 2 +- > board/a3m071/a3m071.c | 91 +++++++++++++++++++++++++++++++++--- > board/a3m071/is46r16320d.h | 35 ++++++++++++++ > boards.cfg | 1 + > include/configs/a3m071.h | 113 > ++++++++++++++++++++++++++------------------- > 6 files changed, 188 insertions(+), 55 deletions(-) > create mode 100644 board/a3m071/is46r16320d.h
Applied to u-boot-mpc5xxx repo, thanks. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de Commitment, n.: Commitment can be illustrated by a breakfast of ham and eggs. The chicken was involved, the pig was committed. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot