Dear Stefan Roese, In message <1360239028-1926-1-git-send-email...@denx.de> you wrote: > This patch adds a custom U-Boot command "wdogtoggle" which enables the > external hardware watchdog toggling via an GPIO pin on the a4m2k > board. After issuing this commands, the watchdog will be serviced > by U-Boot so that the user can use all U-Boot commands from the > prompt. > > Signed-off-by: Stefan Roese <s...@denx.de> > --- > board/a3m071/a3m071.c | 56 > +++++++++++++++++++++++++++++++++++++++++++++++- > include/configs/a3m071.h | 5 +++++ > 2 files changed, 60 insertions(+), 1 deletion(-)
Applied to u-boot-mpc5xxx repo, thanks. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de Pray to God, but keep rowing to shore. - Russian Proverb _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot