On 04/11/2013 02:00 PM, Scott Wood wrote: > On 04/10/2013 07:45:27 PM, Mike Dunn wrote: >> This patch adds a driver for the diskonchip G4 nand flash device. It is >> based >> on the driver from the linux kernel. >> >> This also includes a separate SPL driver. A separate SPL driver is used >> because >> the device operates in a different mode (reliable mode) when loading a boot >> image, and also because the storage format of the boot image is different >> from >> normal data (pages are stored redundantly). The SPL driver basically mimics >> how >> a typical IPL reads data from the device. The special operating mode and >> storage format are used to compensate for the fact that the IPL does not >> contain >> the BCH ecc decoding algorithm (due to size constraints). Although the >> u-boot >> SPL *could* use ecc, it operates like an IPL for the sake of simplicity and >> uniformity, since the IPL and SPL share the task of loading the u-boot image. >> As a side benefit, the SPL driver is very small. >> >> [port from linux kernel 3.4 commit 570469f3bde7f71cc1ece07a18d54a05b6a8775d] >> >> Signed-off-by: Mike Dunn <miked...@newsguy.com> >> --- >> drivers/mtd/nand/Makefile | 2 + >> drivers/mtd/nand/docg4.c | 1035 >> ++++++++++++++++++++++++++++++++++++++++++ >> drivers/mtd/nand/docg4_spl.c | 222 +++++++++ >> include/linux/mtd/docg4.h | 134 ++++++ >> 4 files changed, 1393 insertions(+), 0 deletions(-) >> create mode 100644 drivers/mtd/nand/docg4.c >> create mode 100644 drivers/mtd/nand/docg4_spl.c >> create mode 100644 include/linux/mtd/docg4.h > [snip] >> +#ifdef DEBUG_DOCG4 >> +#define dbg(format, arg...) printf("DEBUG: " format, ##arg) >> +#else >> +#define dbg(format, arg...) do {} while (0) >> +#endif > > Maybe use MTDDEBUG?
Ok. Alternatively, I wouldn't mind pulling them out entirely. It's been behaving quite nicely, and amyway, in the past I used a JTAG emultor rather than the printfs. > > Otherwise: > Acked-by: Scott Wood <scottw...@freescale.com> Many thanks Scott, Mike _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot