On 26/03/13 18:37, Inderpal Singh wrote: > The Arndale board is based on samsung's exynos5250 SOC. > > First patch just removes the redundant SPI configs from common exynos5250 > config file. Second patch moves the board specific configs to board specific > config file. The third adds the andale board support. > > This patchset depends on [1] for tzpc initialization, on [2] for copying > u-boot to RAM from spl, and on first 6 patches of [3] for mmc support. > > [1] http://comments.gmane.org/gmane.comp.boot-loaders.u-boot/156168 > [2] http://comments.gmane.org/gmane.comp.boot-loaders.u-boot/156272 > [3] http://comments.gmane.org/gmane.comp.boot-loaders.u-boot/155368 > > Inderpal Singh (3): > exynos5250: remove redundant SPI related configs > exynos5250: move board specific configs to board specific config file > exynos5250: Add arndale board support > > MAINTAINERS | 4 + > board/samsung/arndale/Makefile | 54 +++ > board/samsung/arndale/arndale.c | 117 ++++++ > board/samsung/arndale/arndale_spl.c | 66 +++ > board/samsung/arndale/clock_init.c | 655 > ++++++++++++++++++++++++++++++ > board/samsung/arndale/clock_init.h | 149 +++++++ > board/samsung/arndale/dmc_common.c | 199 +++++++++ > board/samsung/arndale/dmc_init_ddr3.c | 228 +++++++++++ > board/samsung/arndale/lowlevel_init.S | 92 +++++ > board/samsung/arndale/setup.h | 569 ++++++++++++++++++++++++++ > board/samsung/dts/exynos5250-arndale.dts | 36 ++ > boards.cfg | 1 + > include/configs/arndale.h | 39 ++ > include/configs/exynos5250-dt.h | 29 +- > include/configs/smdk5250.h | 12 +- > include/configs/snow.h | 12 +- > tools/Makefile | 2 + > 17 files changed, 2232 insertions(+), 32 deletions(-) > create mode 100644 board/samsung/arndale/Makefile > create mode 100644 board/samsung/arndale/arndale.c > create mode 100644 board/samsung/arndale/arndale_spl.c > create mode 100644 board/samsung/arndale/clock_init.c > create mode 100644 board/samsung/arndale/clock_init.h > create mode 100644 board/samsung/arndale/dmc_common.c > create mode 100644 board/samsung/arndale/dmc_init_ddr3.c > create mode 100644 board/samsung/arndale/lowlevel_init.S > create mode 100644 board/samsung/arndale/setup.h > create mode 100644 board/samsung/dts/exynos5250-arndale.dts > create mode 100644 include/configs/arndale.h >
Patch 1,2 looks good. But please rebase. please split patch 3 to another patchset. And please check Wolfgang's review. Thanks, Minkyu Kang. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot