Dear Minkyu Kang, Thanks for the comments.
On 21 May 2013 18:23, Minkyu Kang <mk7.k...@samsung.com> wrote: > On 26/03/13 18:37, Inderpal Singh wrote: > > The Arndale board is based on samsung's exynos5250 SOC. > > > > First patch just removes the redundant SPI configs from common exynos5250 > > config file. Second patch moves the board specific configs to board > specific > > config file. The third adds the andale board support. > > > > This patchset depends on [1] for tzpc initialization, on [2] for copying > > u-boot to RAM from spl, and on first 6 patches of [3] for mmc support. > > > > [1] http://comments.gmane.org/gmane.comp.boot-loaders.u-boot/156168 > > [2] http://comments.gmane.org/gmane.comp.boot-loaders.u-boot/156272 > > [3] http://comments.gmane.org/gmane.comp.boot-loaders.u-boot/155368 > > > > Inderpal Singh (3): > > exynos5250: remove redundant SPI related configs > > exynos5250: move board specific configs to board specific config file > > exynos5250: Add arndale board support > > > > MAINTAINERS | 4 + > > board/samsung/arndale/Makefile | 54 +++ > > board/samsung/arndale/arndale.c | 117 ++++++ > > board/samsung/arndale/arndale_spl.c | 66 +++ > > board/samsung/arndale/clock_init.c | 655 > ++++++++++++++++++++++++++++++ > > board/samsung/arndale/clock_init.h | 149 +++++++ > > board/samsung/arndale/dmc_common.c | 199 +++++++++ > > board/samsung/arndale/dmc_init_ddr3.c | 228 +++++++++++ > > board/samsung/arndale/lowlevel_init.S | 92 +++++ > > board/samsung/arndale/setup.h | 569 > ++++++++++++++++++++++++++ > > board/samsung/dts/exynos5250-arndale.dts | 36 ++ > > boards.cfg | 1 + > > include/configs/arndale.h | 39 ++ > > include/configs/exynos5250-dt.h | 29 +- > > include/configs/smdk5250.h | 12 +- > > include/configs/snow.h | 12 +- > > tools/Makefile | 2 + > > 17 files changed, 2232 insertions(+), 32 deletions(-) > > create mode 100644 board/samsung/arndale/Makefile > > create mode 100644 board/samsung/arndale/arndale.c > > create mode 100644 board/samsung/arndale/arndale_spl.c > > create mode 100644 board/samsung/arndale/clock_init.c > > create mode 100644 board/samsung/arndale/clock_init.h > > create mode 100644 board/samsung/arndale/dmc_common.c > > create mode 100644 board/samsung/arndale/dmc_init_ddr3.c > > create mode 100644 board/samsung/arndale/lowlevel_init.S > > create mode 100644 board/samsung/arndale/setup.h > > create mode 100644 board/samsung/dts/exynos5250-arndale.dts > > create mode 100644 include/configs/arndale.h > > > > Patch 1,2 looks good. > But please rebase. > Ok. I will rebase and send it again. > > please split patch 3 to another patchset. > And please check Wolfgang's review. > > Ok, I will split the 3rd patch into another patchset and incorporate the review comments. With Regards, Inder > Thanks, > Minkyu Kang. >
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot