Hello Jagan,


+
+/*
+ * ARM PL022 exists in different 'flavors'.
+ * This drivers currently support the standard variant (0x00041022),
that has a
+ * 16bit wide and 8 locations deep TX/RX FIFO.
+ */
+static int pl022_is_supported(struct pl022_spi_slave *ps)
+{
+       struct pl022 *pl022 = (struct pl022 *)ps->regs;
+
+       /* PL022 version is 0x00041022 */
+       if ((readl(&pl022->ssp_pid0) == 0x22) &&
+           (readl(&pl022->ssp_pid1) == 0x10) &&
+           ((readl(&pl022->ssp_pid2) & 0xf) == 0x04) &&
+           (readl(&pl022->ssp_pid3) == 0x00))


Tab space is required, for this if statement i guess, please check.


If I do then checkpatch reports a warning, saying that I need to keep
all lines of a 'if' statement aligned properly...

So, I guess that this way is more proper.

Agree, but it should be easy to interpret where should the if block
end and where should the code block starts.
I always use tab space like


+static int pl022_is_supported(struct pl022_spi_slave *ps)
+{
+       struct pl022 *pl022 = (struct pl022 *)ps->regs;
+
+       /* PL022 version is 0x00041022 */
+       if ((readl(&pl022->ssp_pid0) == 0x22) &&
+                       (readl(&pl022->ssp_pid1) == 0x10) &&
+                       ((readl(&pl022->ssp_pid2) & 0xf) == 0x04) &&
+                       (readl(&pl022->ssp_pid3) == 0x00))
+               return 1;
+
+       return 0;
+}

If you see return 1 is code block, so prior to this if ends.


OK, I'll do it in this way even if it may generate warnings.
Give me few mins and I'll send a v6 patch!

Thx,
Arm


--
-- "Every step appears to be the unavoidable consequence of the
-- preceding one." (A. Einstein)
--
Armando Visconti                  Mobile: (+39) 346 8879146
Senior SW Engineer                Fax:    (+39) 02 93519290
CPG                               Work:   (+39) 02 93519683
Computer System Division          e-mail: armando.visco...@st.com
ST Microelectronics               TINA:   051  4683


_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to