On 21:11 Thu 02 Apr , Eric BENARD wrote: > Hi Detlef, > > Detlef Vollmann a écrit : > > Change at91 CPUs based on arm926ejs to return milliseconds > > from get_timer and get_ticks. Also changes in the value of > > CONFIG_SYS_HZ to 1000 in all board configs using these CPUs. > > This will not compile on boards using these CPUs with a > > different value for CONFIG_SYS_HZ. > > > > > I confirm that this patch is fixing timeout problems with tftp downloads > on a SAM9260. > What is blocking from pushing it mainline ? see response e-mail and please note that the current patch is not supposed to work because AT91C_MAIN_CLOCK does not exist and it assusme that the main_clock will be at 100000000 which is not the case everytime as example on 9G20 it's not
I've send a new patch that introduce an improve of the clock on at91 which give you the calculated main_clock based on the main crystal and the lowlevel settings Best Regards, J. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot