updating an ubi partition needs a completely erased mtd partition, see: http://lists.infradead.org/pipermail/linux-mtd/2011-May/035416.html
So, add partubi alt setting for the dfu_alt_info environment variable to mark this partition as an ubi partition. In case we update an ubi partition, we erase after flashing the image into the partition, the remaining sektors. Signed-off-by: Heiko Schocher <h...@denx.de> Cc: Pantelis Antoniou <pa...@antoniou-consulting.com> Cc: Tom Rini <tr...@ti.com> Cc: Lukasz Majewski <l.majew...@samsung.com> Cc: Kyungmin Park <kyungmin.p...@samsung.com> Cc: Marek Vasut <ma...@denx.de> Cc: Wolfgang Denk <w...@denx.de> --- - This patch is also a good starting point to fix up updating ubi, as we currently use "nand erase" for erasing the sektors. This is not the prefered way for writing an ubi image, see: http://www.linux-mtd.infradead.org/faq/ubi.html#L_flash_img This must be fixed ... we have no "ubiformat" in u-boot, or? --- drivers/dfu/dfu.c | 33 ++++++++++++++++++++++++++++++++- drivers/dfu/dfu_nand.c | 26 ++++++++++++++++++++++++++ include/dfu.h | 2 ++ 3 Dateien geändert, 60 Zeilen hinzugefügt(+), 1 Zeile entfernt(-) diff --git a/drivers/dfu/dfu.c b/drivers/dfu/dfu.c index 0521752..04059be 100644 --- a/drivers/dfu/dfu.c +++ b/drivers/dfu/dfu.c @@ -23,6 +23,7 @@ #include <errno.h> #include <malloc.h> #include <mmc.h> +#include <nand.h> #include <fat.h> #include <dfu.h> #include <linux/list.h> @@ -176,6 +177,37 @@ int dfu_write(struct dfu_entity *dfu, void *buf, int size, int blk_seq_num) ret = dfu->flush_medium(dfu); printf("\nDFU complete CRC32: 0x%08x\n", dfu->crc); + /* in case of ubi partition, erase rest of the partition */ + if (dfu->ubi == 1) { + int ret; + nand_info_t *nand; + /* erase complete partition */ + nand_erase_options_t opts; + + if (nand_curr_device < 0 || + nand_curr_device >= CONFIG_SYS_MAX_NAND_DEVICE || + !nand_info[nand_curr_device].name) { + printf("%s: invalid nand device\n", __func__); + return -1; + } + + nand = &nand_info[nand_curr_device]; + + memset(&opts, 0, sizeof(opts)); + opts.offset = dfu->data.nand.start + dfu->offset + + dfu->bad_skip; + opts.length = dfu->data.nand.start + + dfu->data.nand.size - opts.offset; + opts.lim = opts.length; + opts.spread = 1; + opts.quiet = 0; + ret = nand_erase_opts(nand, &opts); + if (ret) { + printf("Failure erase: %d\n", ret); + return ret; + } + } + /* clear everything */ dfu_free_buf(); dfu->crc = 0; @@ -186,7 +218,6 @@ int dfu_write(struct dfu_entity *dfu, void *buf, int size, int blk_seq_num) dfu->i_buf = dfu->i_buf_start; dfu->inited = 0; - } return ret = 0 ? size : ret; diff --git a/drivers/dfu/dfu_nand.c b/drivers/dfu/dfu_nand.c index 07dee89..d8afc48 100644 --- a/drivers/dfu/dfu_nand.c +++ b/drivers/dfu/dfu_nand.c @@ -153,6 +153,7 @@ int dfu_fill_entity_nand(struct dfu_entity *dfu, char *s) char *st; int ret, dev, part; + dfu->ubi = 0; dfu->dev_type = DFU_DEV_NAND; st = strsep(&s, " "); if (!strcmp(st, "raw")) { @@ -185,7 +186,32 @@ int dfu_fill_entity_nand(struct dfu_entity *dfu, char *s) dfu->data.nand.start = pi->offset; dfu->data.nand.size = pi->size; + } else if (!strcmp(st, "partubi")) { + char mtd_id[32]; + struct mtd_device *mtd_dev; + u8 part_num; + struct part_info *pi; + + dfu->layout = DFU_RAW_ADDR; + dev = simple_strtoul(s, &s, 10); + s++; + part = simple_strtoul(s, &s, 10); + + sprintf(mtd_id, "%s%d,%d", "nand", dev, part - 1); + printf("using id '%s'\n", mtd_id); + + mtdparts_init(); + + ret = find_dev_and_part(mtd_id, &mtd_dev, &part_num, &pi); + if (ret != 0) { + printf("Could not locate '%s'\n", mtd_id); + return -1; + } + + dfu->data.nand.start = pi->offset; + dfu->data.nand.size = pi->size; + dfu->ubi = 1; } else { printf("%s: Memory layout (%s) not supported!\n", __func__, st); return -1; diff --git a/include/dfu.h b/include/dfu.h index 124653c..7bbe42d 100644 --- a/include/dfu.h +++ b/include/dfu.h @@ -111,6 +111,8 @@ struct dfu_entity { u32 bad_skip; /* for nand use */ unsigned int inited:1; + /* for nand/ubi use */ + unsigned int ubi:1; }; int dfu_config_entities(char *s, char *interface, int num); -- 1.7.11.7 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
