Hello Scott,
Am 18.07.2013 00:35, schrieb Scott Wood:
On 07/15/2013 11:54:09 PM, Heiko Schocher wrote:
updating an ubi partition needs a completely erased mtd partition,
see:
http://lists.infradead.org/pipermail/linux-mtd/2011-May/035416.html
So, add partubi alt setting for the dfu_alt_info environment
variable to mark this partition as an ubi partition. In case we
update an ubi partition, we erase after flashing the image into the
partition, the remaining sektors.
Signed-off-by: Heiko Schocher <h...@denx.de>
Cc: Pantelis Antoniou <pa...@antoniou-consulting.com>
Cc: Tom Rini <tr...@ti.com>
Cc: Lukasz Majewski <l.majew...@samsung.com>
Cc: Kyungmin Park <kyungmin.p...@samsung.com>
Cc: Marek Vasut <ma...@denx.de>
Cc: Wolfgang Denk <w...@denx.de>
---
- This patch is also a good starting point to fix up updating ubi, as
we currently use "nand erase" for erasing the sektors. This is
not the prefered way for writing an ubi image, see:
http://www.linux-mtd.infradead.org/faq/ubi.html#L_flash_img
This must be fixed ... we have no "ubiformat" in u-boot, or?
The lack of erase counter preservation is a problem, but the part about ECC on
erased pages is dealt with in U-Boot by the WITH_DROP_FFS flag.
Ah, ok!
- changes for v2:
- do not use spread = 1 for nand_erase_opts, to prevent
errormessage if there are bad blocks in the erase range.
---
drivers/dfu/dfu.c | 30 +++++++++++++++++++++++++++++-
drivers/dfu/dfu_nand.c | 26 ++++++++++++++++++++++++++
include/dfu.h | 2 ++
3 Dateien geändert, 57 Zeilen hinzugefügt(+), 1 Zeile entfernt(-)
diff --git a/drivers/dfu/dfu.c b/drivers/dfu/dfu.c
index 0521752..7ba7026 100644
--- a/drivers/dfu/dfu.c
+++ b/drivers/dfu/dfu.c
@@ -23,6 +23,7 @@
#include <errno.h>
#include <malloc.h>
#include <mmc.h>
+#include <nand.h>
#include <fat.h>
#include <dfu.h>
#include <linux/list.h>
@@ -176,6 +177,34 @@ int dfu_write(struct dfu_entity *dfu, void *buf, int size,
int blk_seq_num)
ret = dfu->flush_medium(dfu);
printf("\nDFU complete CRC32: 0x%08x\n", dfu->crc);
+ /* in case of ubi partition, erase rest of the partition */
+ if (dfu->ubi == 1) {
+ int ret;
+ nand_info_t *nand;
+ /* erase complete partition */
+ nand_erase_options_t opts;
+
+ if (nand_curr_device < 0 ||
+ nand_curr_device >= CONFIG_SYS_MAX_NAND_DEVICE ||
+ !nand_info[nand_curr_device].name) {
+ printf("%s: invalid nand device\n", __func__);
+ return -1;
+ }
+
+ nand = &nand_info[nand_curr_device];
+
+ memset(&opts, 0, sizeof(opts));
+ opts.offset = dfu->data.nand.start + dfu->offset +
+ dfu->bad_skip;
+ opts.length = dfu->data.nand.start +
+ dfu->data.nand.size - opts.offset;
+ ret = nand_erase_opts(nand, &opts);
+ if (ret != 0) {
+ printf("Failure erase: %d\n", ret);
+ return ret;
+ }
+ }
Instead of separately erasing the remainder of the partition, how about
recognizing up front that it's UBI (or that a full partition erase is otherwise
desired) and erasing the full partition then? Besides being cleaner, it would
be easier to convert to
an ubi-aware mechanism.
I tried this too, but if I erase the hole partition first (when
a dfu transfer is started) I got:
GADGET DRIVER: usb_dnl_dfu
dfu_write: Wrong sequence number! [7] [0]
dfu_write: Wrong sequence number! [7] [1]
dfu_write: Wrong sequence number! [7] [2]
So, this version needs more investigation ...
bye,
Heiko
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
