Hi Marek, On Mon, Oct 28, 2013 at 9:29 AM, Marek Vasut <ma...@denx.de> wrote: > In case the board detected sufficient voltage for battery boot, > make sure the DCDC converter is ON and the board is not running > only from linregs, otherwise an instability will be observed. > > Signed-off-by: Marek Vasut <ma...@denx.de> > Cc: Stefano Babic <sba...@denx.de> > Cc: Fabio Estevam <fabio.este...@freescale.com> > --- > arch/arm/cpu/arm926ejs/mxs/spl_power_init.c | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c > b/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c > index 8ea45be..d25019a 100644 > --- a/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c > +++ b/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c > @@ -654,6 +654,8 @@ static void mxs_batt_boot(void) > clrsetbits_le32(&power_regs->hw_power_5vctrl, > POWER_5VCTRL_CHARGE_4P2_ILIMIT_MASK, > 0x8 << POWER_5VCTRL_CHARGE_4P2_ILIMIT_OFFSET); > + > + mxs_power_enable_4p2();
Shouldn't this be conditional? #if defined CONFIG_MXS_ENABLE_4P2 mxs_power_enable_4p2(); #endif Then the boards that need this power supply enable CONFIG_MXS_ENABLE_4P2 in its config file. Regards, Fabio Estevam _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
