On 11/13/2013 09:27 AM, Alban Bedel wrote: > Add support for the new Tamonten™ NG platform from Avionic Design. > Currently only I2C, MMC, USB and ethernet have been tested. > > Signed-off-by: Alban Bedel <alban.be...@avionic-design.de> > --- > V3: * Removed the retries from pmu_write() > * Removed the not strictly needed power init > V4: * Removed the unused PMU defines > * Removed the useless #ifdef > * Reworked the DTS to enable the device at the proper level > * Re-numbered the i2c bus to match the kernel numbering
Note that the kernel doesn't have a defined I2C bus numbering; any numbering that exists is a side-effect of the non-guaranteed I2C node enumeration order. That said, feel free to make the bus ordering in U-Boot be whatever you want. > diff --git a/board/avionic-design/tec-ng/Makefile > b/board/avionic-design/tec-ng/Makefile I believe there's been a recent cleanup pass on all the Makefiles, so a lot of this boiler-plate needs to be removed to conform with the new style. Take a look at board/nvidia/*/Makefile for some examples. Aside from that, the series briefly, Reviewed-by: Stephen Warren <swar...@nvidia.com> _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot