On 21:53 Tue 21 Apr     , Sanjeev Premi wrote:
> The function display_board_info() displays the silicon
> revision as 2 - based on the return value from get_cpu_rev().
> 
> This is incorrect as the current Si version is 3.1
> 
> This patch displays the correct version; but does not
> change get_cpu_rev() to minimize the code impact.
> 
> Signed-off-by: Sanjeev Premi <pr...@ti.com>
> ---
>  cpu/arm_cortexa8/omap3/sys_info.c |   37 
> +++++++++++++++++++++++++++++++++++--
>  1 files changed, 35 insertions(+), 2 deletions(-)
> 
> diff --git a/cpu/arm_cortexa8/omap3/sys_info.c 
> b/cpu/arm_cortexa8/omap3/sys_info.c
> index b385b91..8c6a4d6 100644
> --- a/cpu/arm_cortexa8/omap3/sys_info.c
> +++ b/cpu/arm_cortexa8/omap3/sys_info.c
> @@ -36,6 +36,8 @@ static gpmc_csx_t *gpmc_cs_base = (gpmc_csx_t 
> *)GPMC_CONFIG_CS0_BASE;
>  static sdrc_t *sdrc_base = (sdrc_t *)OMAP34XX_SDRC_BASE;
>  static ctrl_t *ctrl_base = (ctrl_t *)OMAP34XX_CTRL_BASE;
>  
> +static char omap_revision[8] = "";
why 8?
you only have 5 chars
so
static char omap_revision[6] = "";
will be enough
> +
>  /*****************************************************************
>   * dieid_num_r(void) - read and set die ID
>   *****************************************************************/
> @@ -90,6 +92,36 @@ u32 get_cpu_rev(void)
>  
>  }
>  
why not this
in the cpu header

#define ES20    1
#define ES21    2
#define ES30    3
#define ES31    4
> +/**
> + * Converts cpu revision into a string
> + */
> +void set_omap_revision(void)
char* get_str_omap_revision(void)
{
        u32 idcode;
        ctrl_id_t *id_base;

        if (omap_revision[0] != '\0')
                return omap_revision;

        if (get_cpu_rev() == CPU_3430_ES1) {
                strcat (omap_revision, "ES1.0");
        }
        else {
                id_base = (ctrl_id_t *)OMAP34XX_ID_L4_IO_BASE;

                idcode = readl(&id_base->idcode) >> 28;

                switch(idcode) {
                case ES20:
                        strcat (omap_revision, "ES2.0");
                        break;
                case ES21:
                        strcat (omap_revision, "ES2.1");
                        break;
                case ES30:
                        strcat (omap_revision, "ES3.0");
                        break;
                case ES31:
                        strcat (omap_revision, "ES3.1");
                        break;
                default:
                        strcat (str_rev, "ES??");
        }
        return omap_revision;
}

Best Regards,
J.
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to