Thanks Marek,
On 11/11/2013 09:22 AM, Marek Vasut wrote:
Enable PCI express on MX6 Sabrelite.
Signed-off-by: Marek Vasut <ma...@denx.de>
Cc: Albert Aribaud <albert.u.b...@aribaud.net>
Cc: Eric Nelson <eric.nel...@boundarydevices.com>
Cc: Fabio Estevam <fabio.este...@freescale.com>
Cc: Stefano Babic <sba...@denx.de>
---
board/boundary/nitrogen6x/nitrogen6x.c | 7 ++++++-
include/configs/nitrogen6x.h | 11 +++++++++++
2 files changed, 17 insertions(+), 1 deletion(-)
diff --git a/board/boundary/nitrogen6x/nitrogen6x.c
b/board/boundary/nitrogen6x/nitrogen6x.c
index 1712908..46be51e 100644
--- a/board/boundary/nitrogen6x/nitrogen6x.c
+++ b/board/boundary/nitrogen6x/nitrogen6x.c
@@ -369,7 +369,12 @@ int board_eth_init(bd_t *bis)
free(bus);
}
#endif
- return 0;
+
I think this bit needs a different configuration option
and should be disabled by default.
+#ifdef CONFIG_PCI
+ ret = pci_eth_init(bis);
+#endif
+
It seems to lock up the system if you don't have the proper
device connected.
Without this bit, I was able to confirm proper enumeration
of a PCIe bus with a USB 3.0 controller:
00:01.0 - 16c3:abcd - Bridge device
01:00.0 - 1b21:0612 - Mass storage controller
Unfortunately, in a quick test, the image fails to boot
without a PCIe device connected, or oddly, with a different
PCIe ethernet controller connected.
I think it's handy to have the placeholder here, but
I think you're the only person on the planet with the
right set of components to make it work at the moment.
Regards,
Eric
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot