Hello Dennis, the short log should use the standard for the commit logs.
On Mon, Feb 17, 2014 at 2:56 PM, Dennis Gilmore <den...@ausil.us> wrote: > Signed-off-by: Dennis Gilmore <den...@ausil.us> > --- > include/configs/wandboard.h | 87 > +++++++-------------------------------------- > 1 file changed, 12 insertions(+), 75 deletions(-) > > diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h > index 3488472..bb7aadd 100644 > --- a/include/configs/wandboard.h > +++ b/include/configs/wandboard.h > @@ -41,6 +41,11 @@ > #define CONFIG_CONS_INDEX 1 > #define CONFIG_BAUDRATE 115200 > > +#ifndef CONFIG_SPL_BUILD > +#include <config_distro_defaults.h> > +#include <config_distro_bootcmd.h> > +#endif > + > /* Command definition */ > #include <config_cmd_default.h> > > @@ -49,8 +54,6 @@ > #define CONFIG_CMD_BMODE > #define CONFIG_CMD_SETEXPR > > -#define CONFIG_BOOTDELAY 5 > - > #define CONFIG_SYS_MEMTEST_START 0x10000000 > #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 500 * > SZ_1M) > #define CONFIG_LOADADDR 0x12000000 > @@ -66,15 +69,8 @@ > #define CONFIG_CMD_MMC > #define CONFIG_GENERIC_MMC > #define CONFIG_BOUNCE_BUFFER > -#define CONFIG_CMD_EXT2 > -#define CONFIG_CMD_FAT > -#define CONFIG_DOS_PARTITION > > /* Ethernet Configuration */ > -#define CONFIG_CMD_PING > -#define CONFIG_CMD_DHCP > -#define CONFIG_CMD_MII > -#define CONFIG_CMD_NET > #define CONFIG_FEC_MXC > #define CONFIG_MII > #define IMX_FEC_BASE ENET_BASE_ADDR > @@ -114,8 +110,12 @@ > "fdt_high=0xffffffff\0" \ > "initrd_high=0xffffffff\0" \ > "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \ > - "fdt_addr=0x18000000\0" \ > + "fdt_addr_r=0x18000000\0" \ > "boot_fdt=try\0" \ > + "pxefile_addr_r=0x17e00000\0" \ > + "scriptaddr=0x17d00000\0" \ > + "kernel_addr_r=0x13000000\0" \ > + "ramdisk_addr_r=0x15000000\0" \ At least the address that are common to SoCs shouldn't be duplicated here, do it? > "ip_dyn=yes\0" \ > "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \ > "mmcpart=1\0" \ > @@ -134,70 +134,12 @@ > "mmc write ${loadaddr} 0x2 ${fw_sz}; " \ > "fi; " \ > "fi\0" \ > - "mmcargs=setenv bootargs console=${console},${baudrate} " \ > - "root=${mmcroot}\0" \ > - "loadbootscript=" \ > - "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ > - "bootscript=echo Running bootscript from mmc ...; " \ > - "source\0" \ > - "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \ > - "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ > - "mmcboot=echo Booting from mmc ...; " \ > - "run mmcargs; " \ > - "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ > - "if run loadfdt; then " \ > - "bootz ${loadaddr} - ${fdt_addr}; " \ > - "else " \ > - "if test ${boot_fdt} = try; then " \ > - "bootz; " \ > - "else " \ > - "echo WARN: Cannot load the DT; " \ > - "fi; " \ > - "fi; " \ > - "else " \ > - "bootz; " \ > - "fi;\0" \ > - "netargs=setenv bootargs console=${console},${baudrate} " \ > - "root=/dev/nfs " \ > - "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ > - "netboot=echo Booting from net ...; " \ > - "run netargs; " \ > - "if test ${ip_dyn} = yes; then " \ > - "setenv get_cmd dhcp; " \ > - "else " \ > - "setenv get_cmd tftp; " \ > - "fi; " \ > - "${get_cmd} ${image}; " \ > - "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ > - "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \ > - "bootz ${loadaddr} - ${fdt_addr}; " \ > - "else " \ > - "if test ${boot_fdt} = try; then " \ > - "bootz; " \ > - "else " \ > - "echo WARN: Cannot load the DT; " \ > - "fi; " \ > - "fi; " \ > - "else " \ > - "bootz; " \ > - "fi;\0" > + BOOTCMDS_COMMON > > #define CONFIG_BOOTCOMMAND \ > - "mmc dev ${mmcdev}; if mmc rescan; then " \ > - "if run loadbootscript; then " \ > - "run bootscript; " \ > - "else " \ > - "if run loadimage; then " \ > - "run mmcboot; " \ > - "else run netboot; " \ > - "fi; " \ > - "fi; " \ > - "else run netboot; fi" > + "for target in ${boot_targets}; do run bootcmd_${target}; done" > > /* Miscellaneous configurable options */ > -#define CONFIG_SYS_LONGHELP > -#define CONFIG_SYS_HUSH_PARSER > -#define CONFIG_AUTO_COMPLETE > #define CONFIG_SYS_CBSIZE 256 > > /* Print Buffer Size */ > @@ -207,8 +149,6 @@ > > #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR > > -#define CONFIG_CMDLINE_EDITING > - > /* Physical Memory Map */ > #define CONFIG_NR_DRAM_BANKS 1 > #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR > @@ -231,9 +171,6 @@ > #define CONFIG_ENV_OFFSET (6 * 64 * 1024) > #define CONFIG_SYS_MMC_ENV_DEV 0 > > -#define CONFIG_OF_LIBFDT > -#define CONFIG_CMD_BOOTZ > - > #ifndef CONFIG_SYS_DCACHE_OFF > #define CONFIG_CMD_CACHE > #endif > -- > 1.8.5.3 > -- Otavio Salvador O.S. Systems http://www.ossystems.com.br http://code.ossystems.com.br Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot