On Mon, Feb 17, 2014 at 11:56:37AM -0600, Dennis Gilmore wrote:
[snip]
> - "nand read ${fdtaddr} u-boot-spl-os; " \
> + "nand read ${fdt_addr} u-boot-spl-os; " \
> "nand read ${loadaddr} kernel; " \
> - "bootz ${loadaddr} - ${fdtaddr}\0"
> + "bootz ${loadaddr} - ${fdt_addr}\0"
In all of these conversions you should switch loadaddr to kernel_addr_r
too.
[snip]
> - "fdtfile=undefined\0" \
That's a problem. Need this for 'findfdt' to work.
> - "rootpath=/export/rootfs\0" \
> - "nfsopts=nolock\0" \
> - "static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}" \
> - "::off\0" \
[snip]
> - "spiroot=/dev/mtdblock4 rw\0" \
> - "spirootfstype=jffs2\0" \
> - "spisrcaddr=0xe0000\0" \
> - "spiimgsize=0x362000\0" \
> - "spibusno=0\0" \
> - "spiargs=setenv bootargs console=${console} " \
> - "${optargs} " \
> - "root=${spiroot} " \
> - "rootfstype=${spirootfstype}\0" \
> - "netargs=setenv bootargs console=${console} " \
> - "${optargs} " \
> - "root=/dev/nfs " \
> - "nfsroot=${serverip}:${rootpath},${nfsopts} rw " \
> - "ip=dhcp\0" \
[snip]
> - "spiboot=echo Booting from spi ...; " \
> - "run spiargs; " \
> - "sf probe ${spibusno}:0; " \
> - "sf read ${loadaddr} ${spisrcaddr} ${spiimgsize}; " \
> - "bootz ${loadaddr}\0" \
> - "netboot=echo Booting from network ...; " \
> - "setenv autoload no; " \
> - "dhcp; " \
> - "tftp ${loadaddr} ${bootfile}; " \
> - "tftp ${fdtaddr} ${fdtfile}; " \
> - "run netargs; " \
> - "bootz ${loadaddr} - ${fdtaddr}\0" \
> - "ramboot=echo Booting from ramdisk ...; " \
> - "run ramargs; " \
> - "bootz ${loadaddr} ${rdaddr} ${fdtaddr}\0" \
And this is functionality I don't see in the generic distro config that
we still need.
[snip]
> /*
> - * Common filesystems support. When we have removable storage we
> - * enabled a number of useful commands and support.
> + * Include the generic config options and boot environment when not
> + * building our SPL
> */
> -#if defined(CONFIG_MMC) || defined(CONFIG_USB_STORAGE)
> -#define CONFIG_DOS_PARTITION
> -#define CONFIG_CMD_FAT
> -#define CONFIG_FAT_WRITE
> -#define CONFIG_CMD_EXT2
> -#define CONFIG_CMD_EXT4
> -#define CONFIG_CMD_FS_GENERIC
> +#ifndef CONFIG_SPL_BUILD
> +#include <config_distro_defaults.h>
> +#include <config_distro_bootcmd.h>
> #endif
This is fine, for now, but I'll have to shuffle things around later as
some of the good feedback I'd gotten off-list about ti_armv7_common.h is
that it's not as useful for non-Linux targets, so I need to adjust the
contents a bit more.
--
Tom
signature.asc
Description: Digital signature
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
