Hi, I'm running a PowerPC board that uses U-Boot and I get into this loop (see terminal output below). It doesn't matter how I get into this loop. What I really care about is how to break out of it without manually resetting the board. Is there a way to break out of this loop and reset the system via the terminal? Ctrl-X and Ctrl-C doesn't seem to do anything.
TERMINAL OUTPUT Waiting for PHY auto negotiation to complete...... TIMEOUT ! eTSEC1: No link. Speed: 1000, full duplex Using eTSEC2 device TFTP from server 192.168.128.127; our IP address is 192.168.128.128 Filename 'oe/bsp/mvme2500/vxWorks'. Load address: 0x1000000 Loading: T T T T T T T T T T Retry count exceeded; starting again Waiting for PHY auto negotiation to complete...... TIMEOUT ! eTSEC3: No link. Waiting for PHY auto negotiation to complete...... TIMEOUT ! eTSEC1: No link. Speed: 1000, full duplex Using eTSEC2 device TFTP from server 192.168.128.127; our IP address is 192.168.128.128 Filename 'oe/bsp/mvme2500/vxWorks'. Load address: 0x1000000 Loading: T T T T T T T T T T Retry count exceeded; starting again Waiting for PHY auto negotiation to complete...... TIMEOUT ! eTSEC3: No link. Waiting for PHY auto negotiation to complete...... TIMEOUT ! eTSEC1: No link. Speed: 1000, full duplex Using eTSEC2 device TFTP from server 192.168.128.127; our IP address is 192.168.128.128 Filename 'oe/bsp/mvme2500/vxWorks'. Load address: 0x1000000 Loading: T T T T T T T T T T Retry count exceeded; starting again Waiting for PHY auto negotiation to complete...... TIMEOUT ! eTSEC3: No link. Waiting for PHY auto negotiation to complete...... TIMEOUT ! eTSEC1: No link. Speed: 1000, full duplex Using eTSEC2 device TFTP from server 192.168.128.127; our IP address is 192.168.128.128 Filename 'oe/bsp/mvme2500/vxWorks'. Load address: 0x1000000 Loading: T T T T T T T T T ÿT Retry count exceeded; starting again Waiting for PHY auto negotiation to complete...... TIMEOUT ! eTSEC3: No link. Waiting for PHY auto negotiation to complete...... TIMEOUT ! eTSEC1: No link. Speed: 1000, full duplex Using eTSEC2 device TFTP from server 192.168.128.127; our IP address is 192.168.128.128 Filename 'oe/bsp/mvme2500/vxWorks'. Load address: 0x1000000 Loading: T T T T T T T T T T Retry count exceeded; starting again Waiting for PHY auto negotiation to complete...... TIMEOUT ! eTSEC3: No link. Waiting for PHY auto negotiation to complete...... TIMEOUT ! eTSEC1: No link. Speed: 1000, full duplex Thanks Dang ________________________________ This email is non-binding, is subject to contract, and neither Kulicke & Soffa Industries Inc nor its subsidiaries shall have any obligation to you to consummate the transactions herein or to enter into any agreement, other than in accordance with the terms and conditions of a definitive agreement if and when negotiated, finalized and executed between the parties.
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
