Greetings,

On 04/11/2014 09:23 AM, Tran, Dang wrote:
Hi,

I'm running a PowerPC board that uses U-Boot and I get into this loop (see 
terminal output below).
It doesn't matter how I get into this loop. What I really care about is how to 
break out of it without manually resetting the board.
Is there a way to break out of this loop and reset the system via the terminal? 
Ctrl-X and Ctrl-C doesn't seem to do anything.


It might be helpful to know which version of U-Boot you are using.



TERMINAL OUTPUT
Waiting for PHY auto negotiation to complete...... TIMEOUT !
eTSEC1: No link.
Speed: 1000, full duplex
Using eTSEC2 device
TFTP from server 192.168.128.127; our IP address is 192.168.128.128 Filename 
'oe/bsp/mvme2500/vxWorks'.
Load address: 0x1000000
Loading: T T T T T T T T T T
Retry count exceeded; starting again
Waiting for PHY auto negotiation to complete...... TIMEOUT !

For U-Boot builds made from official sources, ctrl-C works for me to terminate the retry TFTP, as shown

=> # with no Ethernet connection...
=> tftp 500000 test.txt
Waiting for PHY auto negotiation to complete....user interrupt!
eTSEC1: No link.
show_boot_progress(-81) boot fail
=> # in the above, "user interrupt!" was the response to ^C
=>
=> # 10.10.0.10 is known to not exist
=> setenv serverip 10.10.0.10
=> tftp 500000 test.txt
Speed: 1000, full duplex
Using eTSEC1 device
TFTP from server 10.10.0.10; our IP address is 10.10.0.15
Filename 'test.txt'.
Load address: 0x500000
Loading: T T
Abort
show_boot_progress(-81) boot fail
=> # in the above, "Abort" was the response to ^C
=>


Please make sure your serial communication terminal emulator correctly transmits the ctrl-C when you type it. To see if this works, get to a U-Boot prompt and type ctrl-C, you should see <INTERRUPT>

...



Thanks
Dang


This email is non-binding, is subject to contract, and neither Kulicke & Soffa 
Industries Inc nor its subsidiaries shall have any obligation to you to consummate 
the transactions herein or to enter into any agreement, other than in accordance 
with the terms and conditions of a definitive agreement if and when negotiated, 
finalized and executed between the parties.

This sort of disclaimer in email to the U-Boot mailing list is frowned upon. Please try to eliminate it for any future postings.

Best regards,
Jim
---
Jim Chargin
AJA Video Systems                       j...@aja.com
(530) 271-3334                          http://www.aja.com
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to